Scenery "pops up"?

Forum dedicated to Microsoft FS2004 - "A Century of Flight".

Scenery "pops up"?

Postby CDreier » Mon Dec 14, 2009 2:35 pm

I've installed FS9 on my new, high-end system (i7920 o/cd to 3.8, 6gb RAM, GTX275 card, etc.)  Everything flows smoothly and I couldn't be more pleased.  However, something isn't quite right in my fs.cfg and I could use some help.  The scenery relatively close to the aircraft continually pops up, or perhaps the better term is that you can see it refreshing itself as the textures and the ground is being updated.  Again, this is close to the aircraft - maybe 2 or 3 miles or so at low altitude.  Any suggestions on what to change in the .cfg to load more of the scenery at one time?  Thanks.
My Specs:
i7 920 oc'd to 3.8
6gb Corsair RAM
ASUS P6T Deluxe v2,
EVGA 275GTX
1TB WD 7200/32 Black
2x 750GB WD 7200/32 Black
Samsung 22" 1680x1050 LCD
Corsair 800D case
Windows 7 64-bit
CDreier
Ground hog
Ground hog
 
Posts: 27
Joined: Tue Jun 03, 2008 2:56 pm

Re: Scenery "pops up"?

Postby gypsymoth » Mon Dec 14, 2009 3:01 pm

Mmm.  Sounds like a graphics thing......some one with more expertise might be able to help.  Try new drivers?   You could do a search for a cfg tweak blog/post here & try tweaking but graphics/drivers......?  :-?
When the c**p hits the fan, get a tent.
gypsymoth
Captain
Captain
 
Posts: 759
Joined: Tue Dec 05, 2006 7:50 pm
Location: EGHH

Re: Scenery "pops up"?

Postby stevehookem » Mon Dec 14, 2009 6:07 pm

Silly question but do you have autogen and scenery sliders maxed out? What about add-on scenery slider? Do that and it helps.

However, FS9 processes ground detail differently than FSX. It's single core vs multi-core processing. I only notice it when I'm actually on the ground, taxiing out or back in.
i7 940 at 4.0ghz
User avatar
stevehookem
1st Lieutenant
1st Lieutenant
 
Posts: 388
Joined: Thu Jul 31, 2008 12:36 pm

Re: Scenery "pops up"?

Postby Fozzer » Tue Dec 15, 2009 4:00 am

...always a thing to remember...

...in real life, you cannot see "clearly" over a distance.....ie; objects appear clearer as you approach them...;)...!

Even though all my FS 2004 Scenery Sliders are "maxed out", I still restrict my "Weather visibility" to between 3, 5 and 10 miles maximum, which makes objects become clearer as I get closer to them, as they will do in real life...especially when flying at low altitude.... :)...!

When you are up in the air, the scenery below you is often obscured by dust, mist, smoke, fog, etc...and this makes the scenery "pop up" as you get closer... :)...!

You cannot see the eyes of the Sheep grazing on the hill 10 miles away from you!...most times you will be lucky to see the Sheep!.... ;D...!

Reducing your "sight distance" makes the experience more realistic.... [smiley=thumbsup.gif]... ;)...!

Paul...pops up in strange places!... ;)... ;D...!
Last edited by Fozzer on Tue Dec 15, 2009 4:05 am, edited 1 time in total.
Win 8.1 64-bit. DX11. Advent Tower. Intel i7-3770 3.9 GHz 8-core. 8 GB System RAM. AMD Radeon HD 7700 1GB RAM. DVD ROM. 2 Terra Byte SATA Hard Drive. Philips 17" LCD Monitor. Saitek Cyborg X Fly-5 Joystick. ...and a Briggs and Stratton Petrol Lawn Mower.
User avatar
Fozzer
Colonel
Colonel
 
Posts: 27361
Joined: Thu Jan 31, 2002 3:11 pm
Location: Hereford. England. EGBS.

Re: Scenery "pops up"?

Postby Romflyer » Tue Dec 15, 2009 2:21 pm

have a read through this page http://www.flightsimworld.com/forums/in ... opic=28865

pay attention to these lines
TERRAIN_DEFAULT_RADIUS=9.500000
TERRAIN_EXTENDED_RADIUS=4.50000
I think it will help for your concern
but there is lots of info there to absorb
Good luck
Rom
Last edited by Romflyer on Tue Dec 15, 2009 2:22 pm, edited 1 time in total.
Romflyer
1st Lieutenant
1st Lieutenant
 
Posts: 396
Joined: Thu Feb 21, 2008 4:04 pm
Location: Canada

Re: Scenery "pops up"?

Postby HoratioWondersocks » Wed Dec 16, 2009 7:22 am

Hello
The setting that is usually associated with the texture 'popping' problem is  the TEXTURE_BANDWIDTH_MULT setting in your FS9 cfg.The default is 40 mine is currently set at 340 some people set it 400 (i believe that anything beyond 400 has no effect,but i could be wrong.This is a well known tweak for texture popping and hopefully you should see an improvement.
cheers Andy
HoratioWondersocks
Ground hog
Ground hog
 
Posts: 23
Joined: Fri Apr 03, 2009 10:35 am

Re: Scenery "pops up"?

Postby Zaphod » Tue Dec 07, 2010 10:11 am

Sorry to resurrect this thread after all this time but I'm having the same problem with the autogen scenery popping up in front of me at low altitudes. I've tried all the recommendations above and apart from Fozzers wise words (which mask the problem rather than curing it) nothing has made any difference.
Since getting my new PC I am able to run everything maxed and FS9 runs really well apart from this probem.

Any more ideas?

Zaphod
What doesn't kill you makes you stronger. But why take the risk?
Windows 10
Intel i7 950 3.06Ghz (8mb Cache)
MSI X58 Pro-E MoBo
MSI GeForce GTX 1050ti oc
Corsair MXS
User avatar
Zaphod
Captain
Captain
 
Posts: 850
Joined: Mon Oct 13, 2003 4:05 pm
Location: U.K.


Return to FS 2004 - A Century of Flight

Who is online

Users browsing this forum: No registered users and 217 guests