Print view
Board index ‹ Computer Hardware & Software Forum ‹ Hardware

Case fans

Graphics Cards, Sound Cards, Joysticks, Computers, etc. Ask or advise here!
Post a reply

Case fans

Postby Gunny04 » Sun Oct 29, 2006 3:21 pm

Ok... My question, How do you measure a case fan area? From side to side? or From corner to corner? I need to figure out what case fan will fit in my computer.
Last edited by Gunny04 on Sun Oct 29, 2006 3:39 pm, edited 1 time in total.
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top

Re: Case fans

Postby ctjoyce » Sun Oct 29, 2006 10:23 pm

No its the circufrance of the fan that you measure, not the outside.

And its probibly an 80mm or 92mm.

Cheers
Cameron
CTJoyce, Modding and voiding warranties since 2003
Sheila's Specs:ASUS Striker Extreme 680i, Intel Core 2 Duo E6600 @ 3.2Ghz, Corsair XMS2 PC2-6400C4 2GB, 2x eVGA 7900GT KO,  Western Digital 80GB SATA & 250GB SATAIII
[b]Vesp
User avatar
ctjoyce
Major
Major
 
Posts: 3820
Joined: Wed Feb 09, 2005 4:42 pm
Location: USA
Top

Re: Case fans

Postby Gunny04 » Sun Oct 29, 2006 11:11 pm

lovely, I dont have a fan to test a measurment on, and I doubt I can measure the slot in the case. So I just buy a fan and keep returning one until it fits?

Cheers, Gunny
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top

Re: Case fans

Postby Mobius » Sun Oct 29, 2006 11:17 pm

It can't be circumference, it has to be radius.  I just bought an 80mm fan and it has an 80mm radius, which would mean it would have a roughly 250mm circumfrence.  So, if you measure diagonally from screw-hole to screw-hole, you would have 160mm for an 80mm fan, 240mm for a 120mm fan, 184mm for a 92mm fan, etc.
Image
User avatar
Mobius
Major
Major
 
Posts: 3653
Joined: Thu Nov 04, 2004 10:44 pm
Location: Wisconsin
Top

Re: Case fans

Postby Gunny04 » Mon Oct 30, 2006 1:49 am

Thanks mobius! I owe you one....

Cheers, Gunny

EDIT: From corner to corner (screw holes) it looks 120mm. For the heck of it, I'll buy a 120mm that can move 110cfm of air, and if it is to big, I'll make it fit...  Unless of course somebody wants to write a tutorial to measure fans... lol... Why cant they just come with the measurements on the bloody mounting position?
Last edited by Gunny04 on Mon Oct 30, 2006 2:05 am, edited 1 time in total.
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top

Re: Case fans

Postby Woodlouse2002 » Mon Oct 30, 2006 8:03 am

[quote]Thanks mobius! I owe you one....

Cheers, Gunny

EDIT: From corner to corner (screw holes) it looks 120mm. For the heck of it, I'll buy a 120mm that can move 110cfm of air, and if it is to big, I'll make it fit...
Woodlouse2002 PITA and BAR!!!!!!!!

Our Sovereign Lord the King chargeth and commandeth all persons, being assembled, immediately to disperse themselves, and peaceably to depart to their habitations, or to their lawful business, upon the pains c
User avatar
Woodlouse2002
Colonel
Colonel
 
Posts: 10369
Joined: Wed Feb 06, 2002 3:51 pm
Location: Cornwall, England
Top

Re: Case fans

Postby Brett_Henderson » Mon Oct 30, 2006 8:46 am

How did this thread go seven posts without the word " diameter "
Last edited by Brett_Henderson on Mon Oct 30, 2006 9:05 am, edited 1 time in total.
Brett_Henderson
Major
Major
 
Posts: 3403
Joined: Fri Oct 08, 2004 7:09 am
Top

Re: Case fans

Postby flymo » Mon Oct 30, 2006 9:15 am

[quote]How did this thread go seven posts without the word " diameter "
flymo
 
Top

Re: Case fans

Postby Gunny04 » Mon Oct 30, 2006 9:56 am

Well I could go by eye, but I like my stuff from newegg, and my local PC shop is the most unreliable.... Everything I bought from there has contributed to massive PC failures.... lol I guess I'll get a 120mm its 120mm from corner to corner, if its too big, I dunno what I'll do, probably mount it somehow, or send back...

Cheers, Gunny
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top

Re: Case fans

Postby flymo » Mon Oct 30, 2006 5:05 pm

lol nice idea gunny, i can image your case now after you decided to add a few more fans.....jsut a mass of whirling black plastic strapped to the outside :P

john
flymo
 
Top

Re: Case fans

Postby beaky » Mon Oct 30, 2006 5:13 pm

Well I could go by eye, but I like my stuff from newegg, and my local PC shop is the most unreliable.... Everything I bought from there has contributed to massive PC failures.... lol I guess I'll get a 120mm its 120mm from corner to corner, if its too big, I dunno what I'll do, probably mount it somehow, or send back...

Cheers, Gunny


Wait!! Stop!!
The measurement refers to the diameter of the fan itself (or more accurately the diameter of the fan aperture), not the corner-to-corner measurement!
Your "120mm" is really an 80mm. The screw holes on a 80mm are about 120mm apart diagonally. A 120mm fan's holes are about 150mm apart.
Believe it or don't- I just measured mine. ;D

But your case may have hole patterns for both sizes... and if not, a little careful drilling will make it work.
Image
User avatar
beaky
Global Moderator
Global Moderator
 
Posts: 12877
Joined: Thu Dec 16, 2004 8:00 am
Location: Shenandoah, PA USA
Top

Re: Case fans

Postby Mobius » Mon Oct 30, 2006 5:46 pm

Ohh, my bad, maybe I should use the right scale here. ;D  I was using the 1/2 cm:1 cm side of my stupid scale.  Rotty has it right (which I can verify, using the correct side of the ruler now ;D).  Sorry for the confusion. ;)
Image
User avatar
Mobius
Major
Major
 
Posts: 3653
Joined: Thu Nov 04, 2004 10:44 pm
Location: Wisconsin
Top

Re: Case fans

Postby Gunny04 » Tue Oct 31, 2006 1:20 am

Why the heck would they put mountings for a worthless 80mm fan? Bah I might MAKE a 120mm fit.... I'll buy an 80mm but it prolly wont fit... But I can always send it back I guess
Last edited by Gunny04 on Tue Oct 31, 2006 1:25 am, edited 1 time in total.
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top

Re: Case fans

Postby Gunny04 » Tue Oct 31, 2006 2:12 am

Who says old junk isnt worth saving? The old HP heatsink fan is mounted, running full rpms fine and dandy, blows maybe 20-30CFM out the back, I think it will actually do nicely, I took the fan mate from my zalman and hooked it to the fan, Now I can control the fan because my onboard motherboard didnt want too. Seems to work fine, no idea if it will make my components any cooler or not.... but I am happy

Gunny, Thanks for all the help!
AMD athlon 3800 Venice Socket 939 64 bit at 2.4Ghz, 6100K8MA-RS Foxconn Motherboard, 1gb (2X512) OCZ Platinum PC3200 Ram, EVGA 8800GTS 640MB OC, 500 Watt NZXT psu, and Windows Vista Ultimate Total hard drive space 530gb
Gunny04
Major
Major
 
Posts: 2059
Joined: Thu Nov 25, 2004 4:44 pm
Location: Michigan
Top
Post a reply

Return to Hardware

Who is online

Users browsing this forum: No registered users and 402 guests