Is this the Ident panel?

[alrot]

My biggest issue its about making the most realistic airplane to the real life md 80-83
I do have a problem and I think I found what I was looking for ,I ask ,Is this panel is to set the Ident NAV1&2 selector?



In some other I read this and I made that panel with the following words as a read it

VHF-1
VHF-2
INT
PA
VOR-DME -ILS
and two big switches below that says ADF 1 and 2
they are only buttoms no Knobs as I saw one of the Photos
Please I need your help,Is this the panel of set the Ident Nav1 and Nav 2 ,ILS etc?????

[SeanTK]

If I am interpreting the term ident correctly, you would be correct, sir!

[alrot]

If I am interpreting the term ident correctly, you would be correct, sir!

I really don't know what they call it

[SeanTK]

Alex,

That panel would not swap the frequencies between radios. It's mainly just an audio panel for choosing what radio systems to listen to.
Pressing the nav 1 button for example on that panel would allow you to hear the Morse code signal for whatever you are tuned into.
The navigation radio (or comm for that matter) itself should have a little arrow icon or similar (just like the default radio stack) for switching the actual frequencies between the radios.

Just to be extra clear, the panel in question is essentially equivalent to the circled part here:



Those little yellow buttons under each frequency area are for actually switching the frequencies. Once again, the top row buttons are only there to:

1. Confirm the navigation station for the navigation radios.
2. Listen to/use different comm radios.

[SeanTK]

Also, here's a nice clear image of the digital system, complete with mostly clear orange warning lights:

http://www.airliners.net/photo/Iberia/M ... 0245808/L/

I think the only differences with the analogue and digital systems is that portion at the bottom of the screen with all of those warnings.

[alrot]

Also, here's a nice clear image of the digital system, complete with mostly clear orange warning lights:

http://www.airliners.net/photo/Iberia/M ... 0245808/L/

I think the only differences with the analogue and digital systems is that portion at the bottom of the screen with all of those warnings.

that was one of the first thing I made by using that Photo plus another one similar and the super 80 pdf ,I already made the upper panel, My problem is that I'm not familiar with many Buttoms and and gauges, So far I have made consoles of Boeing

[DaveSims]

Alrot - I believe you are correct about both buttons having an ident function.

In the aircraft I have flown, the radio itself usually has an Ident button or setting, and the audio panel (which is what I believe you have pictured in your first post on this thread)

[SeanTK]

Alex,

About the radios....you are correct. Same function.


Now for the APU stuff. Please realize that I am in no way an "expert" on this.....




(Note: Those are standard generator switches, not "APU Generator switches". I was not thinking when I labeled them.")

Your standard battery switch for the aircraft should be under where I labeled. Works like any battery switch.

Next, turn on that single fuel pump switch I circled. This will provide fuel to the APU engine.

If you have a power cart/ external power available, flip that appropriate row of switches up to connect external power to the aircraft. The blue lights should light up.

Start the APU with the APU master switch. You should see the two gauges above that section (temp and rpm) start to move as it reads the status of the APU.

Next, flip the switches to the APU power bus on. The blue lights should light up I believe.

You can now disconnect the external power.

Turn the remaining fuel pumps on.

Press those switches to the left of the fuel pumps to start the right and left engines.

Once engines are started, turn on the generator switches. I accidentally labeled them as APU generator switches without thinking. Those should be the normal generator switches you turn on after engine start.

[alrot]

Wow! thanks Sean , Yes as David saids I had another thread and due that nobuddy answer I delete it .
believe it or not making airplanes is a certain way to me its easy, but I have real hard times figuring out how does the real life airplanes works ,it happends with the Citation X with the 707 ,727
Ironic, Isn't  it? the majority have more problems to export in gmax a model or has many other design issues, I making even gauges .

Now we can't do like in the FS2004 times when you could put anything you want in the cockpit ,no matter if doesn't even looks like and airplane's vc ,we can't do that today ,besides is unethical .

I'm living in a "Special Place" where is not easy like going to the airport and talk to a pilot(you can go to jail just for that) or having these "Airshows" the only way I can get near the airplane is thru Internet, we use to have airshows but everything is so dark here today ,If you know what I mean.

Anything you or anyone would like to add ,Information ,Tips about Md 80s for me its like gold , there's not need to be precise ,but your info of the APU starting sequence will help me a lot ,and trust me when I say ,This plane is in delay because this.
I went loking PDFs all over the internet ,but Jezz! Internet have really change ,everything is for sale ,even a stupid rubber floor texture cost like $20..much more expencive than the real rubber its self
http://basementremodelingguide.com/basement-flooring/

thanks Sean

Alex       

[1olehippy]

Alex

The photo you 1st showed is actually the microphone volume control panel. It only controls the output volume of your microphone. Operating manual, Section 10 Page 4 show a different version/same controls.

Dave

[alrot]

Alex

The photo you 1st showed is actually the microphone volume control panel. It only controls the output volume of your microphone. Operating manual, Section 10 Page 4 show a different version/same controls.

Dave

thanks  :-/
then where is the sets of the navs? 

[DaveSims]

Alex

The photo you 1st showed is actually the microphone volume control panel. It only controls the output volume of your microphone. Operating manual, Section 10 Page 4 show a different version/same controls.

Dave

I would question your response, because that looks entirely like the audio panel.  If you zoom in, you will see the selectors for Nav1 Nav2 and Marker Beacon listed there as well, just like any other aircraft's audio panel will have.

[alrot]

I already make a Dummy of this part (can be also change)
based on my paint art I made of the

[1olehippy]

Alex
Found your answer. It's both voice & ident panel.

http://www.airliners.net/photo/Monarch- ... 1f9af387e0

Check the center switch on the bottom. It switches between voice & ident.

Dave

[alrot]

Alex
Found your answer. It's both voice & ident panel.

http://www.airliners.net/photo/Monarch- ... 1f9af387e0

Check the center switch on the bottom. It switches between voice & ident.

Dave

thank you Dave ,David & Sean ,I'm going to make it like this ,the same panel is in three parts of the VC ,Ill assume has to eb like that ,besides its taking a lot time ,the airplane will be ready soon