Digital Aviation Cheyenne

[RacingLad]

I recently posted this in the Digital Aviation forum but got no reponse. I hope you guys can help:

[b]Hello Lads,

Here

[SeanTK]

Ok.....so you have your throttle levers on idle, but what is the position of your prop rpm levers and condition levers?
You may be able to get away with prop levers full forward, but beyond having the throttles reduced, make sure you reduce the condition levers to idle as well.

[grizzard]

Your props have too much pitch .... pull back to 1%. Ok now ... Brakes on, throttle on idle, roll trim for nose up, props 1 %, condition levers at default.

[RacingLad]

[quote]Your props have too much pitch .... pull back to 1%. Ok now ... Brakes on, throttle on idle, roll trim for nose up, props 1 %, condition levers at default.

[grizzard]

[quote]Well, the condition lever on the cheyenne is basicaly an on-off switch, there

[RacingLad]

You mean, managment from Digital?

If that

[grizzard]

Yes on your 1st question.

[BigTruck]

I get the same issue, what I do is hit shift +F1 to feather the prop, then do a brief shift +F2 and it will feather the prop even more, to the point where you don't even really hear the props, just the turbines.  You won't move