How to add landing lights?

Flight Simulator 2002. Questions, suggestions, problems or solutions... aim here!

How to add landing lights?

Postby WebbPA » Wed Jun 18, 2003 3:16 pm

I've noticed a lot of my addons don't have landing lights.  I've experimented with about everything I can think of but nothing works.

In particular there is an undocumented, apparently nonfunctional light #5 for landing lights, and an effect called landing.fx.  You would think that would work but it doesn't.

Is there a way to do it?
WebbPA
Ground hog
Ground hog
 
Posts: 0
Joined: Sat Sep 25, 2010 6:01 pm

Re: How to add landing lights?

Postby fisharno » Wed Jun 18, 2003 3:41 pm

Landing.FX, I think are the tire smoke/dust/rain water effects that are visible when landing. Landing lights are, (I think), in the aircraft.cfg file. But, the entries for the lights are coded to include light intensity, and where they are located on the aircraft. Tricky stuff.  ;)
User avatar
fisharno
Captain
Captain
 
Posts: 590
Joined: Fri Nov 08, 2002 12:37 pm
Location: Reno, Nv

Re: How to add landing lights?

Postby RollerBall » Wed Jun 18, 2003 4:29 pm

Jim, this landing light problem was discussed right from the very beginning of FS2002 (Hagar will remember as well!)

Afraid that landing lights that you can see from the cockpit are only programmable in GMax (and I guess now FSDS2) aircraft.

They are in the model and you definitely cannot add em yourself. Many many many guys tried every which way to do it but no one succeeded.
RollerBall
 

Re: How to add landing lights?

Postby WebbPA » Wed Jun 18, 2003 5:34 pm

I was afraid of that.  At least now I can stop trying to accomplish the impossible.
WebbPA
Ground hog
Ground hog
 
Posts: 0
Joined: Sat Sep 25, 2010 6:01 pm

Re: How to add landing lights?

Postby sloop » Wed Jun 18, 2003 6:24 pm

fisharno, what type of plane is that in that little pic? where caan I download it?
S/V Fender Bender 2
Cheat lake
Morgantown West Virginia
sloop
Ground hog
Ground hog
 
Posts: 13
Joined: Tue Jun 03, 2003 4:41 pm
Location: Morgantown West Virginia

Re: How to add landing lights?

Postby fisharno » Thu Jun 19, 2003 9:13 am

It's the GMAX C-5 Galaxy.
;D

Search the "Military" section here at SimV.
User avatar
fisharno
Captain
Captain
 
Posts: 590
Joined: Fri Nov 08, 2002 12:37 pm
Location: Reno, Nv

Re: How to add landing lights?

Postby emh8 » Thu Jun 19, 2003 1:19 pm

This is a problem that I have toiled with...........far too much.  

I have found that one alternative to adding landing lights is to add white navigational lights to the leading edges of the wings, or wherever I wanted the lights to appear.  The problem here, of course, is that the navigational lights do not have the intensity of landing lights.

In the aircraft.cfg file, white navigational lights are indicated by the entry,"fx_navwhih."

Erik :)
emh8
1st Lieutenant
1st Lieutenant
 
Posts: 330
Joined: Tue Feb 18, 2003 7:09 pm
Location: Minneapolis, Minnesota

Re: How to add landing lights?

Postby RollerBall » Thu Jun 19, 2003 2:25 pm

There are a few examples of aircraft where there is only 1 model available but this is fairly rare.

The other alternative therefore is not to get too attached to models that don't have the latest features and to regularly look for new ones on the fs servers that do.

I have to confess that I've oftem made do because I like a particualr aircraft only to find I've been missing out for ages on something even better because I hadn't bothered to look! Remember that model makers are looking for new opportunities all the time

;)
RollerBall
 

Re: How to add landing lights?

Postby WebbPA » Thu Jun 19, 2003 2:52 pm

In this case I was dealing with an FS98 or 2K B-1B that didn't have any lights on it.  I got the beacons and strobes installed but got hung up on the landing lights.

As far as I know the only other B-1B is the I3D, which seems plagued with problems.

That's just another thing I need to look for when I get a new aircraft.
WebbPA
Ground hog
Ground hog
 
Posts: 0
Joined: Sat Sep 25, 2010 6:01 pm

Re: How to add landing lights?

Postby fisharno » Fri Jun 20, 2003 12:34 pm

I read here that you can add lines to the .cfg file to make the existing landing lights brighter. I don't have an example in front of me, at the moment, (I'm at work), but say your .cfg file has something like:

(Just a crude example)

[Lights]
Landing_NoseWheel=19.996, 17.000, 37.0

You can add another exact line after the first one, so it looks like this:

[Lights]
Landing_NoseWheel=19.996, 17.000, 37.0
Landing_NoseWheel=19.996, 17.000, 37.0

This gives you a Nose Wheel landing light that is twice as bright as before.

I've done this to a couple of planes, and they look great from the tower view when you're landing. But, it still won't visibly illuminate the ground in front of you.
User avatar
fisharno
Captain
Captain
 
Posts: 590
Joined: Fri Nov 08, 2002 12:37 pm
Location: Reno, Nv


Return to FS 2002

Who is online

Users browsing this forum: No registered users and 629 guests