Here's one for the Guru's

FSX including FSX Steam version.

Here's one for the Guru's

Postby Devon H » Tue Jan 06, 2009 2:01 pm

ok so i have looked and just couldnt find anything on this but is there a way to get things like packing crates and stuff that you hook up to a helicoptor in Free Flight and/or Multiplayer? and how do i go about designing or touching up planes, i cant seem to find any reliable software to do it, just stuff to do re-paints...i'm totally lost  :(
Last edited by Devon H on Tue Jan 06, 2009 2:09 pm, edited 1 time in total.
Devon H
Ground hog
Ground hog
 
Posts: 3
Joined: Thu Dec 25, 2008 10:14 pm
Location: Beaumont, Tx

Re: Here's one for the Guru's

Postby garymbuska » Tue Jan 06, 2009 8:04 pm

[quote]ok so i have looked and just couldnt find anything on this but is there a way to get things like packing crates and stuff that you hook up to a helicopter in Free Flight and/or Multiplayer? and how do i go about designing or touching up planes, i cant seem to find any reliable software to do it, just stuff to do re-paints...i'm totally lost
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: Here's one for the Guru's

Postby Devon H » Tue Jan 06, 2009 10:02 pm

well i mean for totally rendering new aircraft. Or for some of these aircraft that have un-finished cockpits (missing gauges) or no VC.
Devon H
Ground hog
Ground hog
 
Posts: 3
Joined: Thu Dec 25, 2008 10:14 pm
Location: Beaumont, Tx

Re: Here's one for the Guru's

Postby Ulf B » Wed Jan 07, 2009 1:27 pm

well i mean for totally rendering new aircraft. Or for some of these aircraft that have un-finished cockpits (missing gauges) or no VC.


Hi,

Here is a site where you may start your journey http://fsdeveloper.com/

I assume that you already have installed FSX SDK. A must if you want to do some development for FSX.

Ulf B
Ulf B
Asus P6T Deluxe, Intel Core i7 940 @4.1GHz
OCZ Platinum XTC DDR3 1600MHz 3x2GB
ZOTAC GTX 480 AMP!
Vista Home Premium 64 SP1, FSX SP2 on VelociRaptor, NOD32
User avatar
Ulf B
Ground hog
Ground hog
 
Posts: 35
Joined: Mon Jan 05, 2009 1:48 pm
Location: Sweden

Re: Here's one for the Guru's

Postby Fr. Bill » Wed Jan 07, 2009 1:38 pm

You can create completely new aircraft using the FSX SDK tools.

You can NOT "modify" or otherwise "complete" already compiled models. Period.
BillImage Gauge Programming - 3d Modeling Eaglesoft Development Group Intel Core 2 Quad Q6600-4GB DDR2 Crucial PC6400-800 GB SATA-ATI Radeon HD2400 Pro 256MB DX10 [i
Fr. Bill
Captain
Captain
 
Posts: 961
Joined: Sun Apr 27, 2003 1:31 pm
Location: Hammond, IN


Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: No registered users and 724 guests