by dave3cu » Sat Jun 28, 2008 9:04 am
Once you've pressed and released (Shift+P) and the aircraft starts backing.
Press a number (no Shift required):
1-turns left 90* then continues straight back
2-turns right 90* then continues straight back
3-stops the pushback
*Numbers are those on the main keyboard, not the numpad.
*After pressing number it takes approx. 1/2 plane length before turn begins.
*Once you press (Shift+P) do not press any other keys or buttons except the number keys or the sim can lose focus on the pushback and the turns won't happen. (You can usually 'pan', with the hat switch, without consequence)
* Don't forget to release the parking brake before starting pushback.
Dave
Last edited by
dave3cu on Sat Jun 28, 2008 12:02 pm, edited 1 time in total.
At that time [1909] the chief engineer was almost always the chief test pilot as well. That had the fortunate result of eliminating poor engineering early in aviation.