747 keeps stalling?

[NickN]

Quick and dirty

Default 747

Turn on lights (forget the procedure for now, just turn them on)

Set flaps to 10

Throttle up to 65% once she gets rolling push the throttle up to 85-90%

we dont firewall jets on takeoff except in a E situation

Once you reach 160-170Kts, start pulling back gently on the yoke

[tcco94]

Thanks so much NickN  :D
That helps me alot with my next flight but a few other questions I have about the default 747

1. What speeds do I put past 20,000 or 30,000?

2. What do I set on the feet.per.minute when im flying so it wont stall and crash?

3. Same as 2 but on desent.

Thanks so much  ;)

[NickN]

On AP?

Take off 1200-1500 max, increase to 1800 after takeoff and then drop to 1000 after a few thousand feet then gently down to 800 if you want to give the passengers a smooth ride.

Maintain at or about 250KTs below 10000ft and above you can increase speed. Some switch to Mach at 10K and just set the auto throttle

As long as you do not drop below 150Kts you should not stall

Coming down, that

[tcco94]

Alright im gunna give this a try. I already know how to ILS, just my problems were with right after takeoff on my climbing to a cruising altitude everything went wrong. I normally fly 737's is why. Thanks for the help though  ;)

If I have any other problems ill just message back on here.

Thanks agian to everyone that helped  :)