TROUBLE WITH SEEING THE NEW CESSNA CITATION 500

[Boikat]

The only thing I see is that I have no thumb.db in my texture files.  Everything else is there.  I wouldn't think that a missing thumb data base would cause a problem since that's the first time i've seen a "db" in a texture file anyway.

I compaired it to another aircraft that has only .dds files in the textures, the CRJ700, I don't see the difference there (except the file names, of course) and the CRJ700 works just super.

For two "ghosts" (Bronco and Citation 500) and one that shows no color (black shape, the Mohawk, except for one of the paints), I'm not so sure I'd jump of the reinstall plank just yet.

Although it may come down to that.  ;)

[Boikat]

I'm going to follow along with that, just in case.

[Brett_Henderson]

I might have missed it, if it were mentioned earlier in this thread..  

What graphics cards are we dealing with ?

[Hagar]

The only thing I see is that I have no thumb.db in my texture files.  Everything else is there.  I wouldn't think that a missing thumb data base would cause a problem since that's the first time i've seen a "db" in a texture file anyway.

You're better off without it. Those Thumbs.db files shouldn't be there & are more likely to cause problems.

[Alejandro Rhodes]

Ohhhh Thanksss God!!!!! you show here Brett ....

I gotta huge headache cause of this

[amerie]

I have to become some sort of detective here ,


Second with your question Eric you have answer this issue , You Don't know how to convert a simple ZIP file into a normal file...

we have to start from the begining Eric...

First Download again the entire Citation 500 here

http://www.simviation.com/fsxjets35.htm

after that once you have a NEW zip file we will continue

HEY I JUST NOW DOWNLOADED IT...HEY DID YOU SEE ON THE POST THAT A GUY HAD THE SAME PROBLEM AND HE SENT YOU A PICTURE OF THE AIRPLANE HOW IT LOOK ALL YOU SEE ARE THE PILOT AND SOME OTHER THINGS. I JUST DOWNLOADED IT. I CHECKED ALL THE FILES THAT NEED TO BE IN THERE AND THEY ARE. I EVEN EXTRACED THE FILES JUST TO SEE IF ANYTHING DIFFERENT AND THEN DRAG OVER BUT STILL THE SAME. DO I HAVE TO FIX THE MESH QUALITY ON MY SETTING IN THE GAME CAUSE I HAD THEM OFF BECAUSE I THINK WITH ALL THE GRAPHICS IT SLOWS MY COMP A LIL

[Alejandro Rhodes]

You heard Brett question, aren't you ? What video card do you have?

HEY I JUST NOW DOWNLOADED IT...

and boy that was fast ,you download a 35mb zip files in less than 8 minutes?

[Brett_Henderson]

And it's never a good idea to just drag files out of a zip file.

[Boikat]

[quote]I might have missed it, if it were mentioned earlier in this thread..

[Boikat]

Downloaded.  (I paid my $19.99!  :)  )

[Hagar]

I still think you're barking up the wrong tree. If this problem is not caused by the lack of SP1 or SP2 then I suspect it's a display driver or FSX display setting issue.

[Boikat]

Etreacted to it's own little folder

You may be right Hagar, but, on the other hand, out of the 230 aircraft I have, I'm skeptical, expecially since there are only three with "visuals" problems.

But you still may be right.

[amerie]

HEY WHAY DO YOU HAVE YOUR DISPLAY SETTINGS ON?

[Alejandro Rhodes]

Eric Forget all about setting manual Graphic in the display at..

all that plane has to show even in the most minimal way ,also forget about the aircraft without cfg ,you have your setting in Hide extention ,we will work on your issue but first ,we have to know what video card do you have it, and I really hope is non integrated video card too...that would be the problem

[amerie]

IS IT BEST TO EXTRACT THE FILE TO MY DESKTOP AND THEN JUST DRAG OR PASTE IT TO MY AIRPLANE FOLDER? INSTEAD OF EXTRACTING FILE TO AIRPLANE FOLDER?