Getting a new rig, suggestions on loading it

FSX including FSX Steam version.

Getting a new rig, suggestions on loading it

Postby loomex » Thu Feb 07, 2008 6:01 pm

Well, within the next few days I will be getting a new rig. Here are the specs:
HP Pavilion Media Center m8200n Desktop PC
Base processor
Athlon 64 X2 (W) 6000+ 3.0 GHz (89W)
2000 MT/s (mega transfers/second)
Socket AM2
Chipset
GeForce 6150SE nForce 430
Memory Installed 3 GB
Maximum allowed 8 GB (4 x 2 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less
Speed supported PC2-5300 MB/sec
Type 240 pin, DDR2 SDRAM
Hard drive
500 GB SATA 3G (3.0 Gb/sec)
7200 rpm
16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
TV tuner card with FM tuner
Operating System
Windows Vista Home Premium with Windows Media Center

I will also be getting a PNY - Verto GeForce 8500 GT Graphics Card with 512Mb .

From what I have read here, there and everywhere is that after I get the Internet up and running I need to install all vista updates before I put any software on it. I have FSX Deluxe and Acceleration. Any other help or advice would be useful for me. As you can tell from my sig, this will be a decent upgrade for me
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: Getting a new rig, suggestions on loading it

Postby Corrupt Silence » Thu Feb 07, 2008 6:57 pm

You are correct, do not install anything on it until you update Vista. Also update all of your drivers and DirectX. Install AVG (or your preference) anti-virus and then defrag. Then begin installing all of your outside software, then run a disk clean-up and defrag one more time. That is how I have done it anyhow.  8-)
A man's last real freedom is the control of his attitude in any given situation.

AMD Athlon 64 X2 5600+ Processor
GIGABYTE GA-M59SLI-S5 Motherboard
APEVIA ICEBERG ATX-IB680W-RD Power
GeForce 8800GTS 640MB Clocked Video Card<
User avatar
Corrupt Silence
2nd Lieutenant
2nd Lieutenant
 
Posts: 55
Joined: Mon May 21, 2007 1:01 pm
Location: Fallon, NV (USA)

Re: Getting a new rig, suggestions on loading it

Postby Wii » Thu Feb 07, 2008 6:59 pm

8500GT no. Try the 8600GT or the HD3850. I have similar system specs.
User avatar
Wii
Major
Major
 
Posts: 2727
Joined: Wed Jun 13, 2007 2:33 pm
Location: Space

Re: Getting a new rig, suggestions on loading it

Postby loomex » Thu Feb 07, 2008 7:49 pm

From what I have read, the computer I am getting has a 300watt power supply, and the 8600gt requires a bit more juice
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: Getting a new rig, suggestions on loading it

Postby Corrupt Silence » Thu Feb 07, 2008 7:58 pm

No worries, the power supply you get with a pre-built PC will undoubtedly go bad in 6 months to a years time. Then you can buy a new Power Supply and an 8800 GT. ;D
A man's last real freedom is the control of his attitude in any given situation.

AMD Athlon 64 X2 5600+ Processor
GIGABYTE GA-M59SLI-S5 Motherboard
APEVIA ICEBERG ATX-IB680W-RD Power
GeForce 8800GTS 640MB Clocked Video Card<
User avatar
Corrupt Silence
2nd Lieutenant
2nd Lieutenant
 
Posts: 55
Joined: Mon May 21, 2007 1:01 pm
Location: Fallon, NV (USA)

Re: Getting a new rig, suggestions on loading it

Postby Mermaid Man » Thu Feb 07, 2008 8:42 pm

Do not buy a Alienware, they're overpriced. To the OP- that's quite a old spec machine there. You'll get faster performance with a Intel Core 2 Duo chip, with a 8800GT. A AMD 3Ghz dual core is slower than a similar priced Intel Duo chip.

8500 series of cards are lousy, basically suitable for a HTPC, not gaming.
User avatar
Mermaid Man
2nd Lieutenant
2nd Lieutenant
 
Posts: 221
Joined: Wed Jan 23, 2008 7:53 pm

Re: Getting a new rig, suggestions on loading it

Postby steve s » Thu Feb 07, 2008 8:45 pm

Safe some headache and get rid of that Vista for the XP 64bit.
Last edited by steve s on Thu Feb 07, 2008 8:46 pm, edited 1 time in total.
User avatar
steve s
2nd Lieutenant
2nd Lieutenant
 
Posts: 85
Joined: Thu Jan 17, 2008 1:15 am
Location: USA

Re: Getting a new rig, suggestions on loading it

Postby reider » Fri Feb 08, 2008 6:57 am

I run a 3800+ dual core on mainly high settings, using Vista 32 bit, for me it runs better than XP and gives excellent FPS even on only a Geforce 7600GT(roughly equiv to an 8600).  I have 7 computers including a Mac running XP, OSX, Vista 32 bit, Vista 64 bit, Standard and Deluxe FSX.  I had XP 64 bit but due to the problems gaining drivers and lack of support at the time I ditched it.  I would not personally go back full time to any version of XP just for FSX, I went back for 24 hours and regretted it.  Some say its better, I found not in my case.

I agree that at the moment Intel are running the show, but the 6000 will not do you any disservice.  The current and the intended video card will, the current PSU is also a problem...300W is far too little.  I would speak to the supplier and see if some kind of compromise could be reached.  Also, shop around for the best prices and guarantees, prices are at an all time low at the moment.  But still some people try to offload inferior machines.  AKA Celeron and Sempron, cut down versions sold at the same price as full bore chips to very gullible people.

Reider
reider
Captain
Captain
 
Posts: 634
Joined: Wed Jan 31, 2007 10:47 pm

Re: Getting a new rig, suggestions on loading it

Postby loomex » Fri Feb 08, 2008 11:31 pm

Well, I cant complain with what I got. The water now looks like water with reflections. Still need to do some tweaking but It is running great
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY


Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: No registered users and 807 guests