YS-11T-A "Tomboy (not flying...)

[IKEpod]

despite some people's non understanding and patronising drivel

I've been working at bratislava airport to get this baby flying............

I did it just 10 minutes ago. the problem I found is this. the throttle quadrant (click the little icon), is default set to flight. which seems to run up the engines immediately despite being set to F1
So when you appear at the runway end, to start. slap on the parking brakes press f10 and select the throttle quadrant button. move the throttle setting to ground and fire up to full (f4) or Jstick throttle.
1 press on f7 flaps too.
the plane will run down the runway, now as you pick up speed flick the switch back to flight (you could designate a key for it. and off you go into the wild blue yonder. take the throttle back to 3/4 or you'll burn out the engines after a few minues Some slovakian got toasted me for tea  :'(

Hi,
I think there's a way to fix this in tone of the CFG files.

IKE

[ATI_7500]

Hi Bjoern,
thanks for the help, but I already successfully inserted the GPS, and its working .

Nice to hear.