ACTIVE CAM WING VIEWS

[727 driver]

useing fs9 poskey 767 300 with active cam installed...there are no ving views as there is with the 757 200 300...anyone know if there is a fix for this in aircraft config so with active cam i can get the wing views in the 767 300

[skoker]

use the vc model...

Aircraft CFG should look like this:

...
model=
panel=...

After "model=" insert "wv"

[727 driver]

just tried that..and the after makeing the adjustment the plane was no longer visable in the sim under slect aircraft..am i missing something it had this     model=nowv   i made it wv and dident work...

use the vc model...

Aircraft CFG should look like this:

...
model=
panel=...

After "model=" insert "wv"

[gtirob01]

If Im not mistaken, you can only have one or the other. You cannot have both wingviews and vc with the Posky birds. If you want wingviews, you will have to use a model that does not have vc, and vice versa. You cant just add wv at the end and expect it to work. There are coordinates and such for the wingviews. Look at the posky site again and see if there are any downloads for a wingview model.

[727 driver]

well after further research gtirob u are quite correct.. skoker post got me to try it and after it dident work i dug further..(and by the way skoker thank u for the post as it led me to my answer)...i found that in order to have wing view using active cam the aircraft u are using MUST have those wing views modeled ..if not modeled theres nothing that can be done with the plane in question..in fact under model in the aircraft folder it has   modelnowv...its my take that that if the folder says that there is nothing that can be done...and thats ok at least i do have my answer...thanks again for the postes gentlemen...

If Im not mistaken, you can only have one or the other. You cannot have both wingviews and vc with the Posky birds. If you want wingviews, you will have to use a model that does not have vc, and vice versa. You cant just add wv at the end and expect it to work. There are coordinates and such for the wingviews. Look at the posky site again and see if there are any downloads for a wingview model.