FS9.1 closes when I switch planes

Forum dedicated to Microsoft FS2004 - "A Century of Flight".

FS9.1 closes when I switch planes

Postby loomex » Thu Dec 15, 2005 1:36 pm

I am sure that this has been brought up, but could not find it. Here is an example of what I am talking about. I landed my Boeing 797 at philly, and wants to switch to my PAD Dash-8. The sim freezes that closes and tell me I should send the error to MS. This happens not with just these two planes, but with a lot of them. I have tried switching to the default cessna then to the new plane, but even this fails sometimes.
Any Ideas?
Chris
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: FS9.1 closes when I switch planes

Postby Fozzer » Thu Dec 15, 2005 2:59 pm

I often experience exactly the same problem*....

The error is often reported as:
Weather.dll
Panel.dll
etc...
...or sometimes a General Protection Fault.

It's really annoying while you are in the middle of a Multiplayer fly-out....
...you swop planes and the whole system crashes... :'(...!
Buggar... >:(...!

...don't know what the cure is tho'... ::)...!

Paul... 8)...!

*...interestingly, it didn't occur in FS 2000/2002... ;)...!
Win 8.1 64-bit. DX11. Advent Tower. Intel i7-3770 3.9 GHz 8-core. 8 GB System RAM. AMD Radeon HD 7700 1GB RAM. DVD ROM. 2 Terra Byte SATA Hard Drive. Philips 17" LCD Monitor. Saitek Cyborg X Fly-5 Joystick. ...and a Briggs and Stratton Petrol Lawn Mower.
User avatar
Fozzer
Colonel
Colonel
 
Posts: 27370
Joined: Thu Jan 31, 2002 3:11 pm
Location: Hereford. England. EGBS.

Re: FS9.1 closes when I switch planes

Postby jimclarke » Thu Dec 15, 2005 9:12 pm

Same thing happens to me from time to time.  Doesn't seem to be any specific aircraft. ???

Jim
No God? Know God!
User avatar
jimclarke
Captain
Captain
 
Posts: 553
Joined: Sun Nov 16, 2003 1:38 am
Location: Arizona

Re: FS9.1 closes when I switch planes

Postby loomex » Fri Dec 16, 2005 7:22 am

This can be caused by something not quite right with the aircraft folder.
I have FOUND the biggest cause for this is in the aircraft.cfg file where the air file is not the same as the actual file (EXAMLPE air file name is b7234.air but the aircraft cfg file will use the name b7324.air) THE FILE NAME HAS TO BE AN EXACT MATCH LETTER FOR LETTER UPPER AND LOWER CASE MUST MATCH AS WELL OR IT WILL NOT WORK.
The other problem I have seen is no air file at all
AIRCRAFT MUST HAVE AN .AIR FILE IN ORDER TO WORK EVEN IF IT IS ONLY AI. 8)


I give it a try, but first which line needs to be correct?:
My aircraft.cfg file says:

[fltsim.0]
title=DHC8-Q202_AWE_ver4.6
sim=PAD_Dhc8

and the air file is: PAD_DHC8.air

My guess is the sim line.

Chris
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: FS9.1 closes when I switch planes

Postby Fozzer » Fri Dec 16, 2005 7:36 am

...the funny thing is...
The individual aircraft selection, ....any aircraft, will work without fault at start-up....
...Its only when "changing" aircraft whilst the program is running that causes the problem... :o...!

Cheers all...!

Paul.... 8)...!
Win 8.1 64-bit. DX11. Advent Tower. Intel i7-3770 3.9 GHz 8-core. 8 GB System RAM. AMD Radeon HD 7700 1GB RAM. DVD ROM. 2 Terra Byte SATA Hard Drive. Philips 17" LCD Monitor. Saitek Cyborg X Fly-5 Joystick. ...and a Briggs and Stratton Petrol Lawn Mower.
User avatar
Fozzer
Colonel
Colonel
 
Posts: 27370
Joined: Thu Jan 31, 2002 3:11 pm
Location: Hereford. England. EGBS.

Re: FS9.1 closes when I switch planes

Postby Hagar » Fri Dec 16, 2005 7:36 am

THE FILE NAME HAS TO BE AN EXACT MATCH LETTER FOR LETTER UPPER AND LOWER CASE MUST MATCH AS WELL OR IT WILL NOT WORK.

In my experience the case is not important in CFG file entries. What might affect this is the MDL file having a different file prefix to the AIR file. I don't have the FS9.1 update installed & haven't experienced the problem myself so I can't say if this will affect anything.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30869
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: FS9.1 closes when I switch planes

Postby garymbuska » Fri Dec 16, 2005 8:39 am

If you look in the aircraft folder you should see a .AIR file  for that plane that name should be the same as the sim= line.
As far as the case issue goes I had a plane that would cause fs to crash when I tried to load it and after several hours of trying to figure it out I noticed that the air file had(b747ifdg.air) but the sim= line had(B747ifdg.air) in it. I changed the sim= line to(b747ifdg.air) and it worked.
If this is not the problem than there is some other issue but 9 out of ten it is a problem with the .AIR file either missing or not the same.
8)
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: FS9.1 closes when I switch planes

Postby Hagar » Fri Dec 16, 2005 8:44 am

[quote]If you look in the aircraft folder you should see a .AIR file
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30869
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: FS9.1 closes when I switch planes

Postby Hagar » Fri Dec 16, 2005 12:04 pm

I was under the impression that the plane you see in the select aircraft window comes from the .MDL file not from the .AIR file.
After all MDL stands for model does it not?
and the .air file has to deal with how the palne flys or acts as it flys.
But I could be mistaken. :P :-[ :-/

If the AIR file is missing you will get an error message on selecting the aircraft even if it displays on the menu. Delete one & try it.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30869
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: FS9.1 closes when I switch planes

Postby garymbuska » Fri Dec 16, 2005 3:51 pm

I thought that is what I said............ ??? ::) :P
Gary M Buska
SYSTEM Specs ASUS P8Z68 V/GEN 3 mother board: INTELL I7 2600k 3.48 ghz Quad core CPU with Sandy bridge: 12 Gigs of 1800hz ram:
GTX 950 OVER CLOCKED: 2 Gigs Ram Windows 10 Home 64 bit Operating system. 750W Dedicated modular power supply. Two Internal 1TB hard drives 1 External 1TB 3.2 USB hard drive. SAITEK Cessna flight Yoke with throttles.
CH Rudder Peddles 27 inch Wide screen Monitor
User avatar
garymbuska
Major
Major
 
Posts: 4415
Joined: Tue Dec 30, 2003 11:10 am
Location: Jacksonville, Florida

Re: FS9.1 closes when I switch planes

Postby Hagar » Fri Dec 16, 2005 4:02 pm

I thought that is what I said............ ??? ::) :P

Not the way I read it but if I misunderstood I apologise.

I have no way of confirming what you actually said as your reply seems to have been deleted. ;)
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30869
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: FS9.1 closes when I switch planes

Postby loomex » Sat Dec 17, 2005 10:21 pm

I am thinking it might even be the graphic drivers
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: FS9.1 closes when I switch planes

Postby dmalliet » Mon Dec 19, 2005 12:04 am

I had a problem much like that which was solved by replacing a missing file. In my case, gaugesound.dll had been deleted from the FS9 main folder. Replacing that file solved my problem. I hope this is of some help.
dmalliet
Ground hog
Ground hog
 
Posts: 1
Joined: Mon Dec 19, 2005 12:44 am

Re: FS9.1 closes when I switch planes

Postby loomex » Mon Dec 19, 2005 9:50 am

does any one have a list of possible .dll that could be suspect?
Windows 7 Home Premium (x64) ,2.70 gigahertz AMD Phenom II X6 1045T(6-core), two HD (1TB and 500GB), 8gb RAM, ATI Radeon HD 5570,
User avatar
loomex
Major
Major
 
Posts: 1525
Joined: Wed Feb 13, 2002 12:36 am
Location: Ithaca, NY

Re: FS9.1 closes when I switch planes

Postby Fozzer » Mon Dec 19, 2005 10:16 am

does any one have a list of possible .dll that could be suspect?


I have three error reports which regularly pop-up...!

Weather.dll
Panel.dll
Mod.dll

All of which will sometimes re-set the program when changing planes in flight... >:(...!

Cheers...!

Paul.... 8)...!
Win 8.1 64-bit. DX11. Advent Tower. Intel i7-3770 3.9 GHz 8-core. 8 GB System RAM. AMD Radeon HD 7700 1GB RAM. DVD ROM. 2 Terra Byte SATA Hard Drive. Philips 17" LCD Monitor. Saitek Cyborg X Fly-5 Joystick. ...and a Briggs and Stratton Petrol Lawn Mower.
User avatar
Fozzer
Colonel
Colonel
 
Posts: 27370
Joined: Thu Jan 31, 2002 3:11 pm
Location: Hereford. England. EGBS.

Next

Return to FS 2004 - A Century of Flight

Who is online

Users browsing this forum: No registered users and 324 guests