Air craft weight

Forum dedicated to Microsoft FS2004 - "A Century of Flight".

Air craft weight

Postby Bruce » Fri Nov 26, 2004 9:25 pm

Hi Guys
      Top of the day to all. How do you determine the weight of your craft before take off and expecially after a long flight, I see its mentioned a lot in the forum but i never know what is my plane's weight. Any help please?.
Bruce
2nd Lieutenant
2nd Lieutenant
 
Posts: 235
Joined: Thu Mar 07, 2002 10:50 pm

Re: Air craft weight

Postby Scottler » Fri Nov 26, 2004 10:42 pm

Atkins.
Great edit, Bob.


Google it.

www.google.com
Scottler
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 5011
Joined: Mon Jun 16, 2003 10:40 am
Location: Albany, New York USA

Re: Air craft weight

Postby JBaymore » Fri Nov 26, 2004 11:07 pm

Weigh all of your passengers and both their checked baggage and their carry ons.
Last edited by JBaymore on Fri Nov 26, 2004 11:09 pm, edited 1 time in total.
Image ImageIntel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 720
User avatar
JBaymore
Global Moderator
Global Moderator
 
Posts: 10020
Joined: Sat May 24, 2003 9:15 am
Location: New Hampshire

Re: Air craft weight

Postby Bruce » Sat Nov 27, 2004 12:40 am

thanks for the info i appreciate it. I will give it a try
Bruce
2nd Lieutenant
2nd Lieutenant
 
Posts: 235
Joined: Thu Mar 07, 2002 10:50 pm

Re: Air craft weight

Postby JerryH » Sat Nov 27, 2004 1:05 am

Hi Bruce,

An excellent question that more simmers should be asking.  I'll tell you how I figure the weight.  If there's an easier way, I hope someone will let us know.

Look in the aircraft.cfg file and find the section for Weight_and_Balance.  Out of all those numbers, get the empty_weight value and all of the station_load values.  Sometimes there will be only one station_load.

** The weight of the unfueled aircraft is the sum of the empty_weight plus all station_loads.

(If the station_load is zero, that means all crew, PAX, luggage, etc. is lumped into the empty weight.)

Next, find the Fuel section.  The fourth value listed for each tank is the fuel quantity in gallons.  Convert jet fuel to pounds by multiplying gallons by 6.70.  AvGas for the prop planes is usually 6.00 pounds per gallon.  You can verify the fuel values by opening FS, selecting the specific aircraft and clicking on the Fuel tab.

** The total weight of the aircraft when you start the engines is the unfueled weight plus the total fuel.  

If the panel doesn't have a decent fuel gauge, you can determine the fuel remaining at any point in the flight by selecting the aircraft menu and clicking on "fuel".

Hope this helped.

Regards,
JerryH
JerryH
2nd Lieutenant
2nd Lieutenant
 
Posts: 157
Joined: Wed Oct 30, 2002 2:31 pm

Re: Air craft weight

Postby Skligmund » Sat Nov 27, 2004 1:44 am

Well...
You should know how much fuel you have on board the aircraft at the start of your flight.
You should also know what your payload onboard is.
Avgas (100LL) weighs 6 lbs per gallon
Jet 'A' weighs 6.84 lbs per gallon
During flight, you shold have a guage that indicates gallons/pounds of fuel used per hour (GPH or LB's per hour)
Now you know how much your aircraft weighs.
After a flight of X amount of hours, you can calculate how much fuel you have used, and can calculate your landing wieght.
MSI K8N Neo2 Platinum
Athlon64 3700+ San Diego (2200) @ 2750 MHz
1024MB PC3200 @ 500 MHz (Mushkin V2)
GeForce 6800GT OC (BFG)
(2) 80G SATA Seagates RAID0
(1) Maxtor 250Gb 16MB Cache ATA133
19
User avatar
Skligmund
Captain
Captain
 
Posts: 593
Joined: Wed Apr 03, 2002 2:09 am
Location: Anchorage, Alaska


Return to FS 2004 - A Century of Flight

Who is online

Users browsing this forum: No registered users and 833 guests