Evenin' all.
It is possible to put gauges into the Posky A330/340 VCs, but it takes a little work, especially since these models are a little older now, and it may be difficult to find the appropriate files. What you need is the A340 panel by Pasquale Rinaldi (google for it), and then add the following entries into your A340 panel.cfg file (make a backup first). If your panel has VC entries, over-write them with these (this is why you need to make a backup!).
A340:
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg1
gauge00=a340_pr!pfd_a340, 10,10,530,640,11
[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg2
gauge00=a340_pr!hsi_a340, 25,25,500,493
[Vcockpit03]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg5
gauge00=a340_pr!hsi_a340, 25,25,500,493
[Vcockpit04]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg3
gauge00=a340_pr!eicas_a340, 1,3,315,335,11
[Vcockpit05]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg4
gauge00=a340_pr!sd, 10,20,506,380
[Vcockpit06]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg6
gauge00=a340_pr!pfd_a340, 10,10,530,640,11
[Vcockpit07]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg7
gauge00=a340.airspeed, 50,45,410, ,11
[Vcockpit08]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg8
gauge00=ma330aaf.altimeter, 53,35,430, ,11
[Vcockpit09]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap
gauge00=a340_pr!ap_a340, -43,-28,645,180,11
[Vcockpit10]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg9
gauge00=ID_a330_2attitude, 53,72,369, ,11
[Vcockpit11]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg10
gauge00=ID_a330_rmi, 0,-5,420,536,11
[Vcockpit12]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcclock
gauge00=ridlandclock, 50,90,390,600
[Vcockpit13]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap2
gauge00=OBA320_QNH, -60,-150,660,1250
[Vcockpit14]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap3
gauge00=a340_pr!avionics_panel, -110,-210,1250,1100,11
[Vcockpit15]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcldgear
gauge00=a340_pr!gear_light, -600,-330,1750,1750
[Vcockpit16]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcautobrake
gauge00=a340_pr!Autobrakes, 630,-35,150,140
You can use these gauges for the A330 VC panel also; just cut-and-paste the gauges' entries above instead of the A330 gauge entries below (this is where it can get tedious):
A330:
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg1
gauge00=A330!PFD, 5,10,540,500,11
[Vcockpit02]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg2
gauge00=A330!ND for VC, 25,25,500,493
[Vcockpit03]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg5
gauge00=A330!ND for VC, 25,25,500,493
[Vcockpit04]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg3
gauge00=A330!E/WD for VC, 1,3,505,502,11
[Vcockpit05]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$vcg4
gauge00=A330!SD, 10,20,506,380
gauge01=A330!SD Bottom, 10,400,506,77
[Vcockpit06]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg6
gauge00=A330!PFD, 5,10,540,500,11
[Vcockpit07]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg7
gauge00=A330!Airspeed, 2,3,524, ,11
[Vcockpit08]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg8
gauge00=A330!Stdby Altimeter, 2,2,530, ,11
[Vcockpit09]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap
gauge00=A330!FCU, -4,-3,518,160,11
[Vcockpit10]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg9
gauge00=A330!Standby Attitude, 53,72,369, ,11
[Vcockpit11]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcg10
gauge00=A330!DDRMI, 0,-5,420,536,11
[Vcockpit12]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap1
gauge00=A330!MCP, -28,-32,539,479,11
[Vcockpit13]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcclock
gauge00=A330!clock, 0,0,490,510,11
[Vcockpit14]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap2
gauge00=A330!Baro, -3,-4,557,667,11
[Vcockpit15]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcap3
gauge00=A330!FD, -4,1,497,159,11
[Vcockpit16]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcldgear
gauge00=A330!Landing Gear, -282,-550,1877,2083
[Vcockpit17]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=512,512
texture=$vcautobrake
gauge00=A330!Landing Gear, -64,-500,652,697
You need to make sure that the Posky textures have got the VC textures included (lots of BMP files starting 'vc...').
Otherwise there aren't any freeware A330/340 models, so it's worth persisting.
Good luck!
by SuperMonkey » Tue Dec 30, 2008 2:04 pm 
