Can some help me out

[Tjw2]

will someone make a cropduster with a working spray effect

[Isak922]

http://simviation.com/fs2004helicopters31.htm Schweizer 300C Crop Duster. It's a helo, but it's still a cropdusting aircraft  ;D

[Travis]

And with a little knowledge and help, you can get any cropduster that you find (like an Airtractor) to have that same effect.

[Tjw2]

i have had the helecopter but when i put the effect on the airtractor it sprays veritcle above and under the wing

[Travis]

You have to adjust the numbers that are in the aircraft config under the heading [smokesystem].  I don't know what they should be, but they are coordinates for the emitter point of the effect.  You can adjust the vertical and horizontal points in the aircraft config, but the fore and aft point has to be changed in the effect file itself.

[FSGT Gabe]

Here is how you adjust the smokesystem:

The numbers, like Locke said, are the coordinates for where the emitter point is.  The first tells you have far above or below the reference point it is, the second tells you how many feet back or forward, and the third tells you how much left or right it is.  For example:

smoke.0=1.5,-11.0,-8.0,fx_smoke_w

...would be 1.5 feet above the ref point, 11 feet back, and 8 feet to the left.  You can adjust them however you want in the aircraft.cfg.

- Kevin

[Tjw2]

I might seem stupid but i dont know how to do this i dont have the deluxe edditon but if i can do this i would like step by step directions here
Thanks