No VC?  Please Help!

FSSC, Airport 2.*, CfgEdit, etc. Get to grips with designing Scenery & Panels here!

No VC?  Please Help!

Postby exnihilo » Thu Aug 25, 2005 2:02 am

OK, here's my problem.  I'm pretty new to doing panels, and want to just start with a 2D panel.  The problem is, I'm starting off by altering a plane which has a VC.  I just want to make the VC go away, but the (empty) texture files apparently get referenced somewhere outside of the panel.cfg file, and can't be made to go away.  How do I get to a completely non-VC plane, with just a 360 deg view instead of any VC?
300,000 KM/S - Its not just a good idea, its the law.
exnihilo
2nd Lieutenant
2nd Lieutenant
 
Posts: 186
Joined: Tue Apr 26, 2005 12:40 pm
Location: Tempe, AZ

Re: No VC?

Postby Hagar » Thu Aug 25, 2005 4:02 am

This involves hex-editing the MDL file. PM RollerBall. He knows the details.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30862
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: No VC?  Please Help!

Postby WebbPA » Thu Aug 25, 2005 8:01 am

I've posted this before but it might be hard to find.  I didn't create this technique but I've used it a few times and it works.  It doesn't read very well because it's pasted together from different sources.  As always, backup before editing files.

"As far as removing the VC from the A/C model is concerned, it is perfectly possible and actually quite simple to do, involving only a hex editor and one change to the aircraft.mdl file.

Open the mdl file you want to edit and search for the following hex value: 0022003900

In the SECOND occurence of that string, simply change the 39 in 0022003900 to 00. It should now look like this: 0022000000. Save the changes, OK the creation of the backup file then exit the editor to test it out in MSFS.

Open the .mdl file, hit Ctrl+F and enter 0022003900 in the "Find" box. To eliminate the vc, you must change the 39 in this string to 00. NOTE: Since this same string appears several times in the file, you must be careful to alter the correct string. For example, in the DC-3.mdl, altering the FIRST string only loses the plane's shadow, so leave this string intact and hit "Find next". Changing the 39 to 00 in the SECOND string loses the vc.

Do not change all the strings 0022003900. Because then you would make not only the VC invisible, but also the landing lights and even the plane itself. The best way to remove the VC -and ONLY the VC- is looking for the said string, changing the 39 into 00 for the first appearance of the string and then going into FS to see the result. If it didn't work then go back into the hex editor, undo the change and go to the next appearance of the string and change the 39 into 00. Have a look in FS and continue the operation untill the VC has gone. The string 0022003900 appears more than once in a .mdl file and is something like a command telling to show some part of the aircraft model (the VC, landing lights, the model itself, etc..), so make only the change to the string that handles the VC.

In the two months since this topic was posted it has been determined that only the second occurrence of the 0022003900 string concerns the virtual cockpit, the first occurrence switches off the A/C shadows."
WebbPA
Ground hog
Ground hog
 
Posts: 0
Joined: Sat Sep 25, 2010 6:01 pm

Re: No VC?  Please Help!

Postby exnihilo » Thu Aug 25, 2005 11:35 am

Thanks a bunch Webb!  Its working fine and I'm turning off my VC at will now.  
Last edited by exnihilo on Thu Aug 25, 2005 11:35 am, edited 1 time in total.
300,000 KM/S - Its not just a good idea, its the law.
exnihilo
2nd Lieutenant
2nd Lieutenant
 
Posts: 186
Joined: Tue Apr 26, 2005 12:40 pm
Location: Tempe, AZ


Return to Scenery & Panel Design

Who is online

Users browsing this forum: No registered users and 96 guests