I really want to make a panel!!!

FSSC, Airport 2.*, CfgEdit, etc. Get to grips with designing Scenery & Panels here!

Re: I really want to make a panel!!!

Postby GooseSDE » Sun Mar 21, 2004 12:10 pm

rgr......Some things in 2002 and 2004 are slightly similar so i am going to have to look into it deeper and keep troubleshooting. Any other ideas from anyone would be helpful. Thanks guys. What gauge is the radar called ie what is its name?


                                                            Goose
Image
User avatar
GooseSDE
2nd Lieutenant
2nd Lieutenant
 
Posts: 74
Joined: Thu Jan 29, 2004 9:03 am
Location: Connecticut

Re: I really want to make a panel!!!

Postby stevewilson » Mon Mar 22, 2004 3:43 am

Saratoga & Andrew: The radar works fine in FS9, that is after you go and d/l "FSUIPC", virson 3.+, then you will need to get the reg code for it. As I recall you will find the link to the web site where you can get it.

Saratoga: As for the new panel working in FS9, all is fine except I haven't be able to pull up the GPS. Since I last replyed to you here I've even been able to add the catapult launch and cable arrester modes.

I really don't have much experiance with programing, so I'll ask if it is possible to add an icon toggle for the TCAS?

Thanks for a great panel.

Steve
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: I really want to make a panel!!!

Postby N4733D » Mon Mar 22, 2004 6:48 pm

I'll look into the Icon for it. There will be a Version 1.1 no doubt. :P
N4733D
 

Re: I really want to make a panel!!!

Postby GooseSDE » Wed Mar 24, 2004 3:26 pm

Thanks alot for the tip steve, as i went and registered FSUIPC and it works great now. Any luck with the Blue Thunder panel Saratoga?

                                                                       Goose
Image
User avatar
GooseSDE
2nd Lieutenant
2nd Lieutenant
 
Posts: 74
Joined: Thu Jan 29, 2004 9:03 am
Location: Connecticut

Re: I really want to make a panel!!!

Postby stevewilson » Wed Mar 24, 2004 3:47 pm

Your Welcome GooseSDE
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: I really want to make a panel!!!

Postby N4733D » Wed Mar 24, 2004 6:20 pm

Sorry Goose I am just getting to the F-22 panel. I am sorry to everyone. I am in an ROTC program and we have been doing lots of competitions, after school stuff, and promotions lately. I had to go before a board today. I will get around to it asap I promise!
N4733D
 

Re: I really want to make a panel!!!

Postby stevewilson » Thu Mar 25, 2004 12:27 am

Oh Yea, For the good ol school days. Saratoga enjoy them while you can.  ;) I'm really enjoying your f14 panel and the radar is working great. Thanks :)
Steve

CPU: Intel Pentium 4 519 3.06 GHz
Memory: 512MB (256MBx2) DDR PC3200 (400MHz) DIMM
Intel Graphics Media Accelerator 900 Graphics
Motherboard: Intel Augsburg
SATA 8MB Cache 160GB 7200
CD R/W ROM, DVD-R/RW
User avatar
stevewilson
1st Lieutenant
1st Lieutenant
 
Posts: 443
Joined: Sat Feb 28, 2004 4:57 pm
Location: Hanford, Ca.

Re: I really want to make a panel!!!

Postby N4733D » Thu Mar 25, 2004 8:36 am

No prob bud glad ya like it. ;)
N4733D
 

Re: I really want to make a panel!!!

Postby GooseSDE » Fri Mar 26, 2004 4:03 pm

Thats cool Saratoga, no rush...I have been in the Navy the last 5 and a half years, so i understand you have lots to do. Just give me a shout whenever you have a chance to do it.


                                                                             Goose
Image
User avatar
GooseSDE
2nd Lieutenant
2nd Lieutenant
 
Posts: 74
Joined: Thu Jan 29, 2004 9:03 am
Location: Connecticut

Previous

Return to Scenery & Panel Design

Who is online

Users browsing this forum: No registered users and 210 guests