fuel gauge not working

[Prowler1111]

Gents:
I have problems with the fuel gauge in my panel, ,the gauge always reads 0, any hints.
oh it also does the same in the vc

Prowler

[Travis]

Well, if you made the panel, perhaps you are using a gauge intended for a fuel tank that you don't have on the aircraft.  A little more information (aircraft type, number of fuel tanks, etc) might help.  But try switching to a multiple fuel gauge and see if any of the tanks read out.  If so, find a gauge that reads off the same tank.

[Prowler1111]

I

[microlight]

Some gauges specify which tanks refer to them by adding an indicator in the appropriate line of the panel.cfg file.

e.g. for the FS2000 Concorde fuel gauge panel:

gauge00=Concorde!Fuel-Quantity,55,1,64,64,Front
gauge01=Concorde!Fuel-Quantity,1,55,64,64,Left
gauge02=Concorde!Fuel-Quantity,109,55,64,64,Right
gauge03=Concorde!Fuel-Quantity,55,109,64,64,Back

[Prowler1111]

Thanks guys!

That did it..the assigment of the gauges and microlight help
thanks again
best regards

Prowler