Afterburner Petal Problem

[Dornep]

Ok guys I have working afterburner petals, but only 6 of the 24 petals move with the throttle...

At first I thought it was a naming issue so I went through and renamed them. I used the tag tool to name them before, but this time I named them manually. I got the same result only it was petals 17 through 22 that operated correctly.


The first time I had them named lever_throttle01, lever_throttle02, etc, etc..

Now they are named lever_throttle1, lever_throttle2, etc, etc.

When I export only the petals as an X file, and run it through MakeMDL this is the output I get.

Running model


Start! (C:\3dsmax7\meshes\F100.X)
Loading X C:\3dsmax7\meshes\F100.X...
Processing...
ERROR: Scaling null has a translation, ignoring it
Model units are 1024.00 units/meter
Sorting by Material...
Optimize Parts...
Welding...
Generate BGL...
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Assertion failed: file .\xfileprocess.cpp, line 1432 (!m_cScale || m_cScale==2)
Done!
Assembling: C:\3dsmax7\meshes\F100.azm
Done!


I've reset scale on all petals and get the same result. I could also post the asm code if it would help out.

Marc

BTW I'm exporting with Panda from 3dsMax