CFS2 to fs2k2 floatplane conversion

Anything to do with Aircraft Design, FSDS, G Max, Aircraft Animator, SDL Edit, etc. Novice or skilled - stop here & learn!

CFS2 to fs2k2 floatplane conversion

Postby Glitch » Wed Apr 21, 2004 5:14 am

Mornin all! I have a cfs2 amphibian aircraft that I would like to import into fs2k2 the aircraft imports O.K. but FS2k2 does not recognize the cfs2 float designations. Is there a fix for this?

Glitch
Pendercafts.com Downloads for Lost in Space, Voyage to the Bottom of the Sea, Land of the Giants, addons for FS2002 and FS2004 and videos too
Glitch
1st Lieutenant
1st Lieutenant
 
Posts: 464
Joined: Thu Jan 31, 2002 8:12 am
Location: Birmingham, Alabama

Re: CFS2 to fs2k2 floatplane conversion

Postby Hagar » Wed Apr 21, 2004 8:18 am

Hi Glitch. Which floatplane is this? I haven't tried one but assume a proper CFS2 floatplane would work fine in FS2002 or FS9. The floats are defined in the Aircraft.cfg [contact_points] entries. Class 4 gear is floats & 5 is water rudders. You might need to add the FS water effects entries.
Last edited by Hagar on Wed Apr 21, 2004 8:21 am, edited 1 time in total.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30864
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: CFS2 to fs2k2 floatplane conversion

Postby Glitch » Wed Apr 21, 2004 8:08 pm

Hi Hagar it is my Zephyr, floats fine in cfs2 but crashes when I try to land on water in fs2k2. What water effect entries might I need and where would I place them? I can usually get done what I need in cfs2. But Fs2k2 is still a bit of a mystery to me.

Glitch
Pendercafts.com Downloads for Lost in Space, Voyage to the Bottom of the Sea, Land of the Giants, addons for FS2002 and FS2004 and videos too
Glitch
1st Lieutenant
1st Lieutenant
 
Posts: 464
Joined: Thu Jan 31, 2002 8:12 am
Location: Birmingham, Alabama

Re: CFS2 to fs2k2 floatplane conversion

Postby Hagar » Thu Apr 22, 2004 3:31 am

Whenever in doubt I use the default files for examples. The only FS2002 default amphibian is the C208 Caravan. This is the effects entry from Aircraft.cfg.

[EFFECTS]
wake=fx_wake
water=fx_spray
dirt=fx_tchdrt
concrete=fx_sparks
touchdown=fx_tchdwn_s, 1

There are 3rd party water & splash effects posted on various sites if you wish to add them later. You can also compare the [contact_points] entries with yours to see if there's any obvious difference.

If you still can't figure it out, send me the aircraft. I'll see what I can do.

PS. Oops. I forgot I already have it. I'll mess around with it in FS2002 later.
Last edited by Hagar on Thu Apr 22, 2004 3:35 am, edited 1 time in total.
Image

Founder & Sole Member - Grumpy's Over the Hill Club for Veteran Virtual Aviators
Member of the Fox Four Group
My Google Photos albums
My Flickr albums
User avatar
Hagar
Colonel
Colonel
 
Posts: 30864
Joined: Wed Jun 19, 2002 7:15 am
Location: Costa Geriatrica

Re: CFS2 to fs2k2 floatplane conversion

Postby Glitch » Thu Apr 22, 2004 5:26 am

The problem seems to be in the contact points. I added the effects entries and still no joy. I compared to the Caravan and the differences were glaring at me, too many float entries not enough total entries. I guess I will start with the caravan point lay out and edit my values in and see what I can come up with. I will let you know how it works out.

Glitch
Last edited by Glitch on Thu Apr 22, 2004 5:30 am, edited 1 time in total.
Pendercafts.com Downloads for Lost in Space, Voyage to the Bottom of the Sea, Land of the Giants, addons for FS2002 and FS2004 and videos too
Glitch
1st Lieutenant
1st Lieutenant
 
Posts: 464
Joined: Thu Jan 31, 2002 8:12 am
Location: Birmingham, Alabama

Re: CFS2 to fs2k2 floatplane conversion

Postby Glitch » Thu Apr 22, 2004 10:07 pm

I may have found the problem I adjusted my damping ratio settings and managed to land on the water. The wake effects are all wrong though. I think I will have to redo all of the contact points this weekend cause it floats too high out of the water.... but it will land though now. Many thanks!

Glitch
Pendercafts.com Downloads for Lost in Space, Voyage to the Bottom of the Sea, Land of the Giants, addons for FS2002 and FS2004 and videos too
Glitch
1st Lieutenant
1st Lieutenant
 
Posts: 464
Joined: Thu Jan 31, 2002 8:12 am
Location: Birmingham, Alabama


Return to Aircraft & 3D Design

Who is online

Users browsing this forum: No registered users and 508 guests