Hardware FMC

Only for Genuine FS fanatics! Taking this hobby from Real to Surreal? Or maybe just combining 4 hobbies into 1 ;)

Hardware FMC

Postby stevehookem » Wed Aug 12, 2009 5:21 pm

I'd like a hardware FMC that is USB plug and play. I don't like the VR Insight version--it looks cheap to me.

Is there a FMC that will work in a generic cockpit that doesn't cost a fortune? C'mon GoFlight---fill the void!!

Suggestions?
i7 940 at 4.0ghz
User avatar
stevehookem
1st Lieutenant
1st Lieutenant
 
Posts: 388
Joined: Thu Jul 31, 2008 12:36 pm

Re: Hardware FMC

Postby nemesis19 » Thu Aug 13, 2009 7:07 pm

Hi Steve,

OpenCockpits do a hardware FMC at
User avatar
nemesis19
Ground hog
Ground hog
 
Posts: 26
Joined: Fri Apr 14, 2006 7:41 pm
Location: LFBV

Re: Hardware FMC

Postby stevehookem » Fri Aug 14, 2009 9:13 am

Thanks for that! I'll check it out....
i7 940 at 4.0ghz
User avatar
stevehookem
1st Lieutenant
1st Lieutenant
 
Posts: 388
Joined: Thu Jul 31, 2008 12:36 pm

Re: Hardware FMC

Postby expat » Fri Aug 14, 2009 10:56 pm

I'd like a hardware FMC that is USB plug and play. I don't like the VR Insight version--it looks cheap to me.

Is there a FMC that will work in a generic cockpit that doesn't cost a fortune? C'mon GoFlight---fill the void!!

Suggestions?


I would suggest you get one in your hand and have a look before you say VR is looking cheap. I have one of their panels and the quality is the reason I bought it. All metal and very well put together.
Last edited by expat on Fri Aug 14, 2009 10:57 pm, edited 1 time in total.
"A bit of a pickle" - British translation: A catastrophically bad situation with potentially fatal consequences.

PETA Image People Eating Tasty Animals.

B1 (Cat C) licenced engineer, Boeing 737NG 600/700/800/900 Airbus A318/19/20/21 and Dash8 Q-400
1. Captain, if the problem is not entered into the technical logbook.........then the aircraft does not have a problem.
2. And, if you have time to write the fault on a napkin and attach to it to the yoke.........you have time to write it in the tech log....see point 1.
User avatar
expat
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 8679
Joined: Tue Apr 19, 2005 3:06 am
Location: Deep behind enemy lines....

Re: Hardware FMC

Postby stevehookem » Sat Aug 15, 2009 11:31 am

But the VR Insight version doesn't replicate an actual FMC. It has only a one line LED screen.

Also, VAS-FMC doesn't support VNAV? How can your FMC be useful without VNAV?

Maybe I read that wrong....
i7 940 at 4.0ghz
User avatar
stevehookem
1st Lieutenant
1st Lieutenant
 
Posts: 388
Joined: Thu Jul 31, 2008 12:36 pm

Re: Hardware FMC

Postby expat » Sun Aug 16, 2009 11:37 am

But the VR Insight version doesn't replicate an actual FMC. It has only a one line LED screen.

Also, VAS-FMC doesn't support VNAV? How can your FMC be useful without VNAV?

Maybe I read that wrong....


In all truth, no Sim FMC replicates the real thing. No matter what you go for you will not even be scratching the surface. I work with them daily and still find things and functions that I did not know they had ;D

Matt
"A bit of a pickle" - British translation: A catastrophically bad situation with potentially fatal consequences.

PETA Image People Eating Tasty Animals.

B1 (Cat C) licenced engineer, Boeing 737NG 600/700/800/900 Airbus A318/19/20/21 and Dash8 Q-400
1. Captain, if the problem is not entered into the technical logbook.........then the aircraft does not have a problem.
2. And, if you have time to write the fault on a napkin and attach to it to the yoke.........you have time to write it in the tech log....see point 1.
User avatar
expat
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 8679
Joined: Tue Apr 19, 2005 3:06 am
Location: Deep behind enemy lines....

Re: Hardware FMC

Postby nemesis19 » Tue Aug 18, 2009 2:38 am

Also, VAS-FMC doesn't support VNAV? How can your FMC be useful without VNAV?


VAS-FMC doesn't support VNAV, yet.....

Alex and his team are continually upgrading and adding new features, if you have a look around the VAS forum you will find that VNAV is planned sometime in the future...

Regards,
............Adrian19
User avatar
nemesis19
Ground hog
Ground hog
 
Posts: 26
Joined: Fri Apr 14, 2006 7:41 pm
Location: LFBV

Re: Hardware FMC

Postby JBaymore » Sun Aug 23, 2009 7:02 am

But the VR Insight version doesn't replicate an actual FMC. It has only a one line LED screen....


Steve,

I think I read somewhere that they have released a new version that has a full lcd screen instead of the "dumb" one liner.

Of course they likely increased the price to reflect that.  ;)

best,

...............john
Image ImageIntel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 720
User avatar
JBaymore
Global Moderator
Global Moderator
 
Posts: 10020
Joined: Sat May 24, 2003 9:15 am
Location: New Hampshire

Re: Hardware FMC

Postby stevehookem » Tue Aug 25, 2009 11:09 am

John,

Do you use a FMC in your cockpit? If so, which one?
i7 940 at 4.0ghz
User avatar
stevehookem
1st Lieutenant
1st Lieutenant
 
Posts: 388
Joined: Thu Jul 31, 2008 12:36 pm

Re: Hardware FMC

Postby JBaymore » Tue Aug 25, 2009 4:20 pm

Nope....cause the BAE-146-200 does not HAVE one.

However I eventually will add one...since my pit is MY pit... and I am not necessarily tied to duplicating the real aircraft.
Last edited by JBaymore on Tue Aug 25, 2009 4:20 pm, edited 1 time in total.
Image ImageIntel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 720
User avatar
JBaymore
Global Moderator
Global Moderator
 
Posts: 10020
Joined: Sat May 24, 2003 9:15 am
Location: New Hampshire

Re: Hardware FMC

Postby nemesis19 » Thu Aug 27, 2009 8:43 pm

Nope....cause the BAE-146-200 does not HAVE one.


Not strictly true John, some had them and others not. BAe supplied the GNS-X on option. I think all the hybrid Analogue/Glass cockpits had them.

Regards
..........Adrian19
User avatar
nemesis19
Ground hog
Ground hog
 
Posts: 26
Joined: Fri Apr 14, 2006 7:41 pm
Location: LFBV


Return to Home Cockpits and Setups

Who is online

Users browsing this forum: No registered users and 261 guests