massive problem in BIOS

Graphics Cards, Sound Cards, Joysticks, Computers, etc. Ask or advise here!

massive problem in BIOS

Postby EirePlane » Fri Oct 07, 2005 9:39 am

I'm having a problem on a computer at home and don't know how to resolve it.
While making some changes in my BIOS I changed my VGA Memory to Disabled by accident, Now my screen will not display and i can't do anything.

I was thinking of putting my hard drive in another computer to rescue my documents as I have some important information which is not backed up.
Is it safe to do this or will it erase the hard drive?

Also, Is there a way of resetting the BIOS without erasing the Hard Drive?
I was thinking of removing the CMOS battery to revert it as this seems to happen with another computer I own when the CMOS battery runs out.
Would This be possible?

Thank you
Mitchel Moriarty
User avatar
EirePlane
Captain
Captain
 
Posts: 766
Joined: Sun Nov 17, 2002 9:39 am
Location: London, UK

Re: massive problem in BIOS

Postby Weather_Man » Fri Oct 07, 2005 11:14 am

Yes, you can reset the BIOS to defaults by either setting jumpers on the motherboard to clear CMOS, or removing the battery for several minutes (be sure to unplug the PC first).
Weather_Man
2nd Lieutenant
2nd Lieutenant
 
Posts: 184
Joined: Sat Dec 11, 2004 12:52 am
Location: TX

Re: massive problem in BIOS

Postby EirePlane » Fri Oct 07, 2005 12:52 pm

thanks for the help but I have just fixed it anyway.

Just for reference, no, taking out the CMOS battery will not erase your hard drive if you unplug it from the motherboard first
User avatar
EirePlane
Captain
Captain
 
Posts: 766
Joined: Sun Nov 17, 2002 9:39 am
Location: London, UK

Re: massive problem in BIOS

Postby RollerBall » Fri Oct 07, 2005 1:10 pm

:)

Taking out the CMOS battery won't erase your hard drive anyway.

There's no need to remove the CMOS battery for any reason unless it is very old and is losing power. You can tell because the PCs clock begins to slow down eg you set the time today and in a week its 15 minutes behind.

If you make a cockup in a BIOS setting you will find that there is always a jumper labelled CLEAR CMOS that sits on 2 of a group of 3 pins.

First, switch off the PC then REMOVE THE POWER LEAD. It is essential for the mobo NOT to be receiving any power except from the CMOS battery when you clear CMOS.

Do it by removing the jumper and replacing it so it shorts between the middle and the other pin in the group of 3. Leave it for a few seconds then replace it, reconnect the power and boot up the machine.

All of the CMOS settings will have reverted to default - you can tell because in the Standard BIOS settings the year, month, day and time will all have reverted to something like January 1st 2001 00:00 hrs.

All you have to do then is recreate all of the settings to make the machine work properly.

Simple.. ;)
Last edited by RollerBall on Fri Oct 07, 2005 1:11 pm, edited 1 time in total.
RollerBall
 

Re: massive problem in BIOS

Postby JBaymore » Fri Oct 07, 2005 1:50 pm

All you have to do then is recreate all of the settings to make the machine work properly.

Simple.. ;)


Easy for you to say!   ;)

best,

................john
Image ImageIntel i7 960 quad 3.2G LGA 1366, Asus P6X58D Premium, 750W Corsair, 6 gig 1600 DDR3, Spinpoint 1TB 720
User avatar
JBaymore
Global Moderator
Global Moderator
 
Posts: 10020
Joined: Sat May 24, 2003 9:15 am
Location: New Hampshire

Re: massive problem in BIOS

Postby RollerBall » Fri Oct 07, 2005 3:06 pm

[quote]

Easy for you to say!
RollerBall
 

Re: massive problem in BIOS

Postby EirePlane » Fri Oct 07, 2005 4:35 pm

didn't see any jumpers in there but it seems easier to take out the battery and pop it back in again anyway
thanks though
User avatar
EirePlane
Captain
Captain
 
Posts: 766
Joined: Sun Nov 17, 2002 9:39 am
Location: London, UK

Re: massive problem in BIOS

Postby Fozzer » Fri Oct 07, 2005 4:50 pm


Easy for you to say!   ;)

best,

................john


Tee-Hee... ;D...!

...anything to do with Motherboards, BIOS, and Batteries fills me with fear... :o... :'(...!
LOL...!

Paul.... ;D...!
Win 8.1 64-bit. DX11. Advent Tower. Intel i7-3770 3.9 GHz 8-core. 8 GB System RAM. AMD Radeon HD 7700 1GB RAM. DVD ROM. 2 Terra Byte SATA Hard Drive. Philips 17" LCD Monitor. Saitek Cyborg X Fly-5 Joystick. ...and a Briggs and Stratton Petrol Lawn Mower.
User avatar
Fozzer
Colonel
Colonel
 
Posts: 27361
Joined: Thu Jan 31, 2002 3:11 pm
Location: Hereford. England. EGBS.

Re: massive problem in BIOS

Postby congo » Sun Oct 09, 2005 2:01 pm

Fear comes from the unknown, I know perfectly well I can bugger it up, so I'm not scared.
Last edited by congo on Sun Oct 09, 2005 2:07 pm, edited 1 time in total.
ImageMainboard: Asus P5K-Premium, CPU=Intel E6850 @ x8x450fsb 3.6ghz, RAM: 4gb PC8500 Team Dark, Video: NV8800GT, HDD: 2x1Tb Samsung F3 RAID-0 + 1Tb F3, PSU: Antec 550 Basiq, OS: Win7x64, Display: 24&
User avatar
congo
Major
Major
 
Posts: 3655
Joined: Fri Aug 16, 2002 12:13 am
Location: Australia

Re: massive problem in BIOS

Postby the_autopilot » Mon Oct 17, 2005 7:29 pm

thanks for the help but I have just fixed it anyway.

Just for reference, no, taking out the CMOS battery will not erase your hard drive if you unplug it from the motherboard first



Like stated above, removing the cmos battery does not screw your HD. However, what might have happened is when you opened your computer, you touched the HD and fried it (or part of it) with a static charge. This is extremely unlikely, but it has happened before.
Link to sig:
Click here
(Cannot post signature here due to current forum restrications on linked images).
the_autopilot
Major
Major
 
Posts: 1358
Joined: Fri Aug 29, 2003 2:45 am


Return to Hardware

Who is online

Users browsing this forum: No registered users and 576 guests