And you really wanna go beserk like I have (you can put gauges from the concorde in there and get a true mordern day feel). Anyhow all one needs to do is, 1.Get the Hawker-Tempest Panel from Simviation. 2. Get the CFG.Edid program also available in Simviation and use it to put the Cessna's Bendix-King AP Radio gau.file and the Cessna's 182 Directional Gyro.gau file somewhere in the Tempest panel (this can be achieved by moving and resizing the other gauges a tad), and save and install your new "custom" panel to the Hawker Hurricane MkI. (Remember to save your original panel file in a different folder in case anything goes wrong, first". That's it. Now go take her up for a test flight, and if you did it right, and it wasn't a corrupt download etc (happens sometimes, although rare) you should be able to engage autopilot and sit back and read a book or something, while your Hurricane flies herself. - To the guys n gals out there not familar with the Cessna gauges, the directional Gyro is primarily used to set the Heading of your aircraft, and the Autopilot (Bendix) is used to hold that heading. Enjoy!
