Testing Groundbound1's Engine Fire Effects

Flight Simulation Screenshots displaying your Flight Simulation Experience. MSFS, FSX, Prepar3D, XPlane and other Flight Simulators. Focus is your Flight Simulator Experience. Please upload to Simviation (Button at top right)

Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Wed Sep 26, 2007 9:00 pm

I got too involved taking screenshots I didn't realize I had climbed to 7000 feet in some of these while testing the engine fire effects.

Image
Image
Image
Image
Image
Last edited by aussiewannabe on Wed Sep 26, 2007 9:15 pm, edited 1 time in total.
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am

Re: Testing Groundbound1's Engine Fire Effects

Postby Mazza » Wed Sep 26, 2007 9:45 pm

OK how would you land a aircraft that has 1 engine on fire and 1 good???????? :-? :-? :-?
Sunset Chasing...RULES
Image
AMD 9550 2.43 X4 - 2Gb RAM 800Mhz DDRII - Asus 4670
Corsair TX-750W
User avatar
Mazza
Major
Major
 
Posts: 2797
Joined: Sun Aug 05, 2007 12:10 am
Location: Melbourne, Australia.

Re: Testing Groundbound1's Engine Fire Effects

Postby Groundbound1 » Wed Sep 26, 2007 11:44 pm

Easy. Put the gear down, cut the throttle, and point the plane at the fire trucks! ;D
User avatar
Groundbound1
Major
Major
 
Posts: 1670
Joined: Fri Nov 09, 2007 10:59 am
Location: Michigan, USA

Re: Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Wed Sep 26, 2007 11:52 pm

OK how would you land a aircraft that has 1 engine on fire and 1 good???????? :-? :-? :-?


Shut the engine on fire down and in this case declare an emergency with ATC.

I said I was too busy taking shots, but that's no excuse. I was testing the effect to see if momentary screen "white-outs" would occur while displaying these effects. Groundbound1 also mentioned "this effect MAY decide to 'part company' from it's host aircraft during a descent for landing."

Groundbound1, it works! No problems encountered.

Off to make Flyguy35 the proper shot.
Last edited by aussiewannabe on Thu Sep 27, 2007 11:26 am, edited 1 time in total.
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am

Re: Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Thu Sep 27, 2007 12:36 am

Put the gear down


Oh, crap! Didn't think about that one! Would have make an interesting landing had the gear failed.

Edit: Had I seen your remark in the other thread, I would have lowered the gear. Sorry, no fire trucks were available.
Last edited by aussiewannabe on Thu Sep 27, 2007 12:47 am, edited 1 time in total.
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am

Re: Testing Groundbound1's Engine Fire Effects

Postby Groundbound1 » Thu Sep 27, 2007 8:47 am

I'm glad you read the "readme". It's funny how many people don't. I'll probably re-work fire for "version two" ( ;) ) though. For now though, I hope you like it.
User avatar
Groundbound1
Major
Major
 
Posts: 1670
Joined: Fri Nov 09, 2007 10:59 am
Location: Michigan, USA

Re: Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Thu Sep 27, 2007 11:32 am

I'm glad you read the "readme". It's funny how many people don't.


It's the first thing I look at when I download an AC or add-on.

I'll probably re-work fire for "version two" ( ;) ) though. For now though, I hope you like it.


You did a great job. I don't know how you could improve it, but if you can, I look forward to version two. Yes, I like the effect very much.
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am

Re: Testing Groundbound1's Engine Fire Effects

Postby DaveT » Thu Sep 27, 2007 2:07 pm

now why would you want to burn the engine on that Baby?glad you got her down ;D

Dave ;)
User avatar
DaveT
Major
Major
 
Posts: 2260
Joined: Thu Jan 31, 2002 7:46 pm
Location: KGSO

Re: Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Thu Sep 27, 2007 7:31 pm

now why would you want to burn the engine on that Baby?


I wondered about that too. It's my fav prop plane, but when Groundbound was looking for suggestions to test AC, I mentioned it. Should have ask for (although it's now available) for the Beech 18. The last thing Harold would want to see is that AC on fire.

However, a C-45 crashed and burned this past July:

http://www.thedenverchannel.com/slidesh ... etail.html

Sorry, Harold. I was heartbroken too :'(
Last edited by aussiewannabe on Thu Sep 27, 2007 7:37 pm, edited 1 time in total.
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am

Re: Testing Groundbound1's Engine Fire Effects

Postby Groundbound1 » Thu Sep 27, 2007 9:52 pm

now why would you want to burn the engine on that Baby?


I wondered about that too. It's my fav prop plane, but when Groundbound was looking for suggestions to test AC, I mentioned it. Should have ask for (although it's now available) for the Beech 18. The last thing Harold would want to see is that AC on fire.

However, a C-45 crashed and burned this past July:

http://www.thedenverchannel.com/slidesh ... etail.html

Sorry, Harold. I was heartbroken too :'(


Actually....---->
User avatar
Groundbound1
Major
Major
 
Posts: 1670
Joined: Fri Nov 09, 2007 10:59 am
Location: Michigan, USA

Re: Testing Groundbound1's Engine Fire Effects

Postby Clutch_Cargo » Thu Sep 27, 2007 10:26 pm

Great effect.  Is that an add-on or something you are working on?
Prepar3D v2.0 = FS[i]Next[/i]
Clutch_Cargo
Ground hog
Ground hog
 
Posts: 43
Joined: Fri Feb 03, 2006 8:56 pm
Location: San Diego, California, USA

Re: Testing Groundbound1's Engine Fire Effects

Postby aussiewannabe » Thu Sep 27, 2007 11:19 pm

[quote] Actually....---->
HP Media Center Photosmart m7260n | 3.0GHz Intel Pentium D 830 | 2 GB RAM | 320 GB HD | Sapphire X1950 GT 512MB | Silencer 610 Watt PSU

[center][img]
http://www.simviation.com/yabbuploads/aussie_sig1.jpg
User avatar
aussiewannabe
Major
Major
 
Posts: 2530
Joined: Thu May 17, 2007 11:33 am


Return to Simulation Screenshots Showcase

Who is online

Users browsing this forum: No registered users and 513 guests