Bad day in the office!

Flight Simulation Screenshots displaying your Flight Simulation Experience. MSFS, FSX, Prepar3D, XPlane and other Flight Simulators. Focus is your Flight Simulator Experience. Please upload to Simviation (Button at top right)

Bad day in the office!

Postby Ex-RoNiN » Fri Aug 12, 2005 7:02 pm

This wasn't actually planned, it just sort of happened! I had originally planned to fly from Boston (US) to Athens (GR) and make this my first transatlantic voyage!

However, the following happened. Bear in mind that I didn't have my image snapshot thingy ready, so I only managed to make two screens!

Image

Shortly after take-off, I realise that something's wrong - my damn gear is stuck!! :o

What do you do in such a situation ??? I decided to type the ILS information into the autopilot and to return to Logan Intl...

Eventually, my navigation skills (and the autopilot!) brought me back, then the auto took over and guided me in....nice landing actually, but on touch-down, this happened:

Image

The stuck landing gear gave way, and I slid uncontrollably across the runway! I forgot to turn off autopilot too, so this further complicated things! Unfortunately, I continued to slide, straight into an AA 737, holding short (no piccie)  :-X

So, my question is - what could I have done to avert this disaster ???  I think I damaged the gear when on take-off I just about managed to get off the runway, thought I had cleared it but I may have touched grass a bit...but anyway, on realising the gear damage, what else could I have done?  
Ex-RoNiN
2nd Lieutenant
2nd Lieutenant
 
Posts: 60
Joined: Thu Jun 09, 2005 3:06 pm

Re: Bad day in the office!

Postby Foxtrot Sport » Fri Aug 12, 2005 7:38 pm

Doesn't Ctrl+G or Shift+G manually pump the gear in if it gets stuck?  Or is that just in CFS.

-HF
Image
Formerly HighFlyer24
User avatar
Foxtrot Sport
Major
Major
 
Posts: 1027
Joined: Wed Jun 30, 2004 12:33 pm
Location: Sacramento, California

Re: Bad day in the office!

Postby alrot » Fri Aug 12, 2005 7:44 pm

How can this happend ,i like it the landing gear stock espontaniuly like real life... i have to set something i know,BTW good emergecy landing..and beautiful shot specialy the first one :)
  cheers  ;)
Image

Venezuela
User avatar
alrot
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 8961
Joined: Wed Oct 08, 2003 10:47 am

Re: Bad day in the office!

Postby Rocket_Bird » Fri Aug 12, 2005 7:54 pm

Whew... good landing.  I dunno, with such a heavy bird, it might be hard to keep the weight off the bad side with the ailerons  :P  I would assume that the AA 737 was on the left side?  Maybe differential brake into the opposite side to balance the drag? I dunno!  :P
Cheers,
RB

Image
User avatar
Rocket_Bird
Major
Major
 
Posts: 1222
Joined: Fri Aug 06, 2004 12:00 pm
Location: Canada

Re: Bad day in the office!

Postby Dannyboy » Fri Aug 12, 2005 9:09 pm

Interesting dilemma, well you gave it your best try, maybe they should have big nets at or near the end of the runways at the major airports to try and stop run- away planes? Just a thought  ???  ;D
Homebuilt computer. Quad core Intel
Dannyboy
1st Lieutenant
1st Lieutenant
 
Posts: 396
Joined: Mon Aug 18, 2003 11:05 pm
Location: Fort Collins, CO

Re: Bad day in the office!

Postby Mynameisnemo » Sat Aug 13, 2005 7:35 am

Doesn't Ctrl+G or Shift+G manually pump the gear in if it gets stuck?  Or is that just in CFS.

-HF


It does work in all versions of FS, however its better if you have a control on you gampad/joystick to work it as it doesn't require so much effort.

Nemo
Mynameisnemo
 

Re: Bad day in the office!

Postby TwoLow » Sat Aug 13, 2005 8:20 am

I did see a manual gear feature in the commands screen.

Did you set this failure to happen in the failures section or did it happen on its own?
Why yes, I am a noobie/newbie/knewbie
User avatar
TwoLow
2nd Lieutenant
2nd Lieutenant
 
Posts: 130
Joined: Fri Jul 08, 2005 10:04 am
Location: Warner Robins, GA

Re: Bad day in the office!

Postby Ex-RoNiN » Sat Aug 13, 2005 9:47 am

I did see a manual gear feature in the commands screen.

Did you set this failure to happen in the failures section or did it happen on its own?



It happened on its own, I think I screwed up my take-off, I took off from 33L and almost landed in the sea...land slopes down behind the runway, must have damaged it there, as I barely cleared the runway when I started climbing
Ex-RoNiN
2nd Lieutenant
2nd Lieutenant
 
Posts: 60
Joined: Thu Jun 09, 2005 3:06 pm

Re: Bad day in the office!

Postby TwoLow » Sat Aug 13, 2005 10:15 am

I see you guys post pics of damage and sparks and all that and I just never see it.

If I turn crashes off my plane become unbreakable and just bounces around if I fly straight into the ground.

If I turn crashes on it game stops the split second I do anything out of the ordinary. If I bump a tree with the wing tip the game says crash and restarts the flight.

I could never drag a plane down the runway with smoke and sparks.....or can I?

Most planes I have downloaded all have damage=1 in the aircraft file so that means its on right?
Why yes, I am a noobie/newbie/knewbie
User avatar
TwoLow
2nd Lieutenant
2nd Lieutenant
 
Posts: 130
Joined: Fri Jul 08, 2005 10:04 am
Location: Warner Robins, GA

Re: Bad day in the office!

Postby Antei » Sat Aug 13, 2005 10:18 am

I'm not sure about FS, but in real live pulling quite some positive g's can sometimes force the gear out ;)
User avatar
Antei
1st Lieutenant
1st Lieutenant
 
Posts: 473
Joined: Sun May 01, 2005 2:38 am
Location: Edegem, Belgium

Re: Bad day in the office!

Postby Sytse » Sat Aug 13, 2005 10:52 am

You might want to retract all the wheels and belly-land after dumping fuel. If your gear doesn't move at all, have some FFA guys standing on the tower. Then do a flyby so they can grab on to the wheels and pull them off  ;D
User avatar
Sytse
Major
Major
 
Posts: 3397
Joined: Fri Jun 24, 2005 5:26 am
Location: The Netherlands


Return to Simulation Screenshots Showcase

Who is online

Users browsing this forum: No registered users and 342 guests