World Airliners 747 & 777 users only

Flight Simulator 2002. Questions, suggestions, problems or solutions... aim here!

World Airliners 747 & 777 users only

Postby Boris_G » Mon Jun 23, 2003 5:01 pm

Hey
I have World Airliners 747&777 n here is the problem
In FMC u have to select altitude for each waypoint, but in Flight Planner it has the same altatude for every waypoint.
P.S maybe i m doing things wrong bout the FMC, but tell me one more thing !!

How do u make aproach to the runway, im mean like do u follow ATC instructions which tells u the heading n when to descend to which altitude n then u press aproach botton (i set up the FMC before the flight) n then when glide slope n localazier is intercepted u hit aproach(u may hit aproach botton before doesnt rili matter) n let Autopilot take over

Plizz expalin
Dell Dimension 8200
2.49MHz
1GB RAM
64 MB DDR Nvidia GeForce4 Ti4200
Boris_G
2nd Lieutenant
2nd Lieutenant
 
Posts: 168
Joined: Thu Feb 06, 2003 10:44 pm

Re: World Airliners 747 & 777 users only

Postby hiflyphil » Tue Jun 24, 2003 3:47 am

Hi ye

I thing I know, don't use the auto pilot to follow the ATC instructions :-/, the plane won't turn fast enough and won't drop out the sky to the required altitude fast enough and you'll just end up missing the correct approach and circling the airfield. I suggest you practice with that joystick and get a good feel for the plane, :P I'm getting pretty good in my 747 now and 9 times out of 10 I'm on the tarmac as planned, it's also a lot more fun knowing you can do it yourself and if you mess up, hey it's only a simulator and you don't really have 380 people on board ready for the slaughter ;D.

Good flying

Phil
Tower : Flight 2-0-9er, you're cleared for take off.
Oever : Roger!
Murdock : Huh?
Tower : L.A. departure frequency 1-2-3 point 9er.
Oever : Roger!
Murdock : Huh?
: Re-quest Vector, over!
Oever : What?
User avatar
hiflyphil
2nd Lieutenant
2nd Lieutenant
 
Posts: 132
Joined: Tue Jun 17, 2003 4:32 am
Location: England

Re: World Airliners 747 & 777 users only

Postby GreG » Tue Jun 24, 2003 1:51 pm

You can choose your descent rate to go down faster, there's also a switch that you can move in order to change the bank angle so that you can turn faster.  From memory, where the heading hold selection is, you'll see a bank angle switch at the back of the heading selector where you can see different readings (bank angles, auto, then about 5 -25 or something, then maximum or something, can't remember, move the mouse to where you can increase the heading (to the right) then move the mouse until you get the clicking pointer without the + or - , then click and you'll see the bank angle change, keep clicking it to increase the bank angle.  Just a bit of help if you didn't know you could do that.  And as for the approaches, you'll have to practise flying manually or you should read up on the Panel Advanced Manual.  If it's the localizor you don't know how to use, then go to the ground school help or whatever it is in the actual flight sim to learn more about it.  Cause I'm not in the mood to type out a whole document on how to use the instruments. ;D  Sorry...  Don't know if I've answered any questions.

Greg

P.S.  If you get really stuck, e-mail me, my e-mail is at the bottom of my post, or you could try greg2p2r@yahoo.co.uk if you really need help.
If everything seems under control, you're just not going fast enough.
User avatar
GreG
Major
Major
 
Posts: 1061
Joined: Fri Mar 01, 2002 4:55 pm
Location: Cape Town, South Africa.

Re: World Airliners 747 & 777 users only

Postby Boris_G » Wed Jun 25, 2003 9:59 pm

GreG thanx alot ur information was very usefull
Dell Dimension 8200
2.49MHz
1GB RAM
64 MB DDR Nvidia GeForce4 Ti4200
Boris_G
2nd Lieutenant
2nd Lieutenant
 
Posts: 168
Joined: Thu Feb 06, 2003 10:44 pm


Return to FS 2002

Who is online

Users browsing this forum: No registered users and 543 guests