Carriers addon

FSX including FSX Steam version.

Carriers addon

Postby EVVFCX » Thu Jul 14, 2011 10:37 am

Hi all,
Does anybody know what the key command is on the aicarriers 2 to launch the aircraft, the default one of shift +spacebar doesn't work, I was using Dino's T45, the nose wheel was bouncing around when attached to the cat and the exhaust blast barriers don't come up.

All ok in the missions with aircraft carriers.
May the Mynd be with you.
So far my number of landings either passenger or pilot equal my number of takeoffs.

FSX Gold Acc, P3D V4, FS2020
User avatar
EVVFCX
Captain
Captain
 
Posts: 751
Joined: Tue Nov 27, 2007 8:32 am
Location: Pontefract, West Yorkshire

Re: Carriers addon

Postby mjrhealth » Thu Jul 14, 2011 4:05 pm

Shift U launch bar
Shift I arm
shift spacebar launch.

If the blast shield has not raised then the cat is not armed. You may need to play with the position of the plane for it to work correctly. Each plane is a little different.
AMD P2 1090t CPU,4.1 GHZ. 8Gig DDr3 1600 MHz cas 9, ram, Nvidia GTX 560 ti 1 gig Video, Sound Blaster XFI Extreme audio
mjrhealth
2nd Lieutenant
2nd Lieutenant
 
Posts: 187
Joined: Sun Apr 15, 2007 5:06 am
Location: Gosford, NSW Australia

Re: Carriers addon

Postby CHUCK79 » Thu Jul 14, 2011 5:03 pm

Hi all,
Does anybody know what the key command is on the aicarriers 2 to launch the aircraft, the default one of shift +spacebar doesn't work, I was using Dino's T45, the nose wheel was bouncing around when attached to the cat and the exhaust blast barriers don't come up.

All ok in the missions with aircraft carriers.



Are you using FSX/Acceleration? I don't think the cats work without it :)

I had this problem with the VRS Superbug once............the launch bar goes down...... the aircraft attaches.... it says "catapult armed"......all it does is hop the front end and the barrier doesn't come up right?........I wish I knew what solved the problem........but it mysteriously fixed itself??????......and I haven't had a problem with it since :-?
Last edited by CHUCK79 on Thu Jul 14, 2011 5:09 pm, edited 1 time in total.
User avatar
CHUCK79
Global Moderator
Global Moderator
 
Posts: 6168
Joined: Fri Mar 26, 2010 10:13 am
Location: KOMK

Re: Carriers addon

Postby EVVFCX » Fri Jul 15, 2011 7:31 am

Hi All,

I've answered threads on carrier aircraft launches myself, I know it inside out, especially when related to missions.
The problem is purley to do with the aicarrier installation.

I know the button presses off by heartand yes, I'm using acceleration, it's the fsx gold.
The missions that come with gold are all faultless, it's just this aicarrier2 thats not working

Here's what I do: get to cat, lower launch bar, shift and I, t45 'jumps/jerks' as others do as it attaches to the cat but no blast barriers and no response to shift+spacebar, the t45 doesn't even have to be on the cat to be bouncing around, it occasionally looks like the carrier is hitting large waves and the t45 has no damping in the undercarriage suspension, looks more like rodeo at times :)

But the t45 is physically jerking up and down very rapidly, no others do this.
F18 won't launch either so it's a bug somewhere in the install.

I was showing it to the guys at work who I pass my old flight sims to.

Anybody else any other ideas, I'm tempted to uninstall and start afresh, I may have done somethingw rong on the nimitz/ike install.
Last edited by EVVFCX on Fri Jul 15, 2011 10:17 am, edited 1 time in total.
May the Mynd be with you.
So far my number of landings either passenger or pilot equal my number of takeoffs.

FSX Gold Acc, P3D V4, FS2020
User avatar
EVVFCX
Captain
Captain
 
Posts: 751
Joined: Tue Nov 27, 2007 8:32 am
Location: Pontefract, West Yorkshire

Re: Carriers addon

Postby EVVFCX » Sun Jul 17, 2011 4:47 pm

Problem solved but no idea what was causing it, I uninstalled it and reinstalled and now OK.

Just need to see how to config it so I'm landing on the nimitz/ike carrier with other aircraft parked up.
May the Mynd be with you.
So far my number of landings either passenger or pilot equal my number of takeoffs.

FSX Gold Acc, P3D V4, FS2020
User avatar
EVVFCX
Captain
Captain
 
Posts: 751
Joined: Tue Nov 27, 2007 8:32 am
Location: Pontefract, West Yorkshire

Re: Carriers addon

Postby Kim2506 » Mon Jul 18, 2011 11:04 am

In my FSX I realized that if I checked the "Empty Scenery Cache" box in the "Scenery Library" menu and then press OK, I had no more occasional bugs with AICarriers or general AI traffic. AI boats will reload correctly with all their options like cables or catapults for the FSX Carrier (i.e). The rest is about placing your front wheel at the right place, inside the square at the begining of the catapult rail for the FSX FA-18 (i.e),and pressing the requested Shift u, shift i and shift spacebar. With addon airplanes you may need to search the good position a bit. See other posts in this topic.
Last edited by Kim2506 on Mon Jul 18, 2011 11:48 am, edited 1 time in total.
"The surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us." Bill Watterson
Kim2506
Ground hog
Ground hog
 
Posts: 16
Joined: Sun Aug 17, 2008 7:10 am
Location: Switzerland

Re: Carriers addon

Postby EVVFCX » Mon Jul 18, 2011 3:43 pm

Thanks - but I wrote some of the guides on using carriers, I know it inside out, was just that one install that was bugged.
May the Mynd be with you.
So far my number of landings either passenger or pilot equal my number of takeoffs.

FSX Gold Acc, P3D V4, FS2020
User avatar
EVVFCX
Captain
Captain
 
Posts: 751
Joined: Tue Nov 27, 2007 8:32 am
Location: Pontefract, West Yorkshire


Return to Flight Simulator X (FSX) and Steam

Who is online

Users browsing this forum: No registered users and 506 guests