Of Video Cards and Motherboards...

Graphics Cards, Sound Cards, Joysticks, Computers, etc. Ask or advise here!

Re: Of Video Cards and Motherboards...

Postby N. Chapman » Sat Aug 30, 2008 7:15 pm

the pci slots are actually at the bottom. the picture was taken upside down ;D
Image
Click for Computer info overload!
User avatar
N. Chapman
Captain
Captain
 
Posts: 971
Joined: Sat Oct 13, 2007 7:19 pm
Location: Fremont, CA

Re: Of Video Cards and Motherboards...

Postby AMDDDA » Sat Aug 30, 2008 7:19 pm

Then why is the dell thing right side up?
User avatar
AMDDDA
Captain
Captain
 
Posts: 975
Joined: Wed Oct 31, 2007 6:56 pm

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sat Aug 30, 2008 7:22 pm

Yeah, the slots are on the bottom, my bad, wasn't really paying attention when I took the pic.

Sorry, I'm a little lost here. Why do I need a new motherboard as well as a new case? Or vice versa.
Last edited by Ferrari308guy on Sat Aug 30, 2008 7:23 pm, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby AMDDDA » Sat Aug 30, 2008 7:48 pm

You won't need either, it's fine as long as you just put it in...
It may take some force, just keep pushing a little bit.
User avatar
AMDDDA
Captain
Captain
 
Posts: 975
Joined: Wed Oct 31, 2007 6:56 pm

Re: Of Video Cards and Motherboards...

Postby Wii » Sat Aug 30, 2008 7:53 pm

Dump that card and get an 8800GT or buy a new case. ;D Even my HP case isn't THAT small ;D
User avatar
Wii
Major
Major
 
Posts: 2727
Joined: Wed Jun 13, 2007 2:33 pm
Location: Space

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sat Aug 30, 2008 9:12 pm

You won't need either, it's fine as long as you just put it in...
It may take some force, just keep pushing a little bit.


I wish I could...

Becuase I don't have that second slot, I can't line the pins on the video card up with the PCI-E slot.
Last edited by Ferrari308guy on Sat Aug 30, 2008 9:12 pm, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby N. Chapman » Sat Aug 30, 2008 9:39 pm

plus doesn't the heat sink/fan for the CPU get in the way too?
Image
Click for Computer info overload!
User avatar
N. Chapman
Captain
Captain
 
Posts: 971
Joined: Sat Oct 13, 2007 7:19 pm
Location: Fremont, CA

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sat Aug 30, 2008 9:51 pm

plus doesn't the heat sink/fan for the CPU get in the way too?


I was lucky, it fits, but it has like 2mm of clearance...It takes some tricky manuvering to get the card in there. But, like I said, I can't actually plug it in. So close, and yet so far  :-/.
Last edited by Ferrari308guy on Sat Aug 30, 2008 9:51 pm, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby N. Chapman » Sat Aug 30, 2008 10:27 pm

Yeah i'd go with new mobo and case for more breathing room. what kind of socket do you have? 775? Price range?
Last edited by N. Chapman on Sat Aug 30, 2008 10:34 pm, edited 1 time in total.
Image
Click for Computer info overload!
User avatar
N. Chapman
Captain
Captain
 
Posts: 971
Joined: Sat Oct 13, 2007 7:19 pm
Location: Fremont, CA

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sun Aug 31, 2008 10:48 am

Sorry, but what do you mean by 'socket'?

And yeah, you're right, the card actually would run into my air filter if it were to be installed. I don't know if that changes anything...
Last edited by Ferrari308guy on Sun Aug 31, 2008 10:54 am, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sun Aug 31, 2008 11:10 am

Ok, I found what socket means
Last edited by Ferrari308guy on Sun Aug 31, 2008 11:12 am, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby AMDDDA » Sun Aug 31, 2008 11:22 am

Tell us what processor you have...

LGA 775 is what most motherboards for intel are, and that includes ALL core 2 processors, and some more series of 'em.
User avatar
AMDDDA
Captain
Captain
 
Posts: 975
Joined: Wed Oct 31, 2007 6:56 pm

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sun Aug 31, 2008 11:23 am

It's an Intel PentiumD 820 with a Socket 775 LGA, so I suppose that's your answer  ;).
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

Re: Of Video Cards and Motherboards...

Postby AMDDDA » Sun Aug 31, 2008 11:26 am

Cha ching, socket LGA 775.

on newegg just select LGA 775 and then find a new mobo.
User avatar
AMDDDA
Captain
Captain
 
Posts: 975
Joined: Wed Oct 31, 2007 6:56 pm

Re: Of Video Cards and Motherboards...

Postby Ferrari308guy » Sun Aug 31, 2008 11:28 am

Ok, is it possible that you could make a recommendation? I'm a little confused by all the motherboards out there. Do I need an Intel Chipset becuase I have an Intel processor? Or can I go Nvidia? What would be best for FSX?

Thanks for your help everybody.
Last edited by Ferrari308guy on Sun Aug 31, 2008 11:39 am, edited 1 time in total.
Image
| Intel Q6600 2.9 Ghz | EVGA GTX260 896MB | 4GB 1066 Mhz DDR2 RAM | Nvidia 780i Mobo |
User avatar
Ferrari308guy
Captain
Captain
 
Posts: 574
Joined: Sat Aug 04, 2007 7:09 pm

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 177 guests