I have been trying to put strobe lights on a B727 that I downloaded and I have got them close but not quite where they belong can any one shed some light (NO PUN INTENDED) on this.
Below is the entry inside the aircraft cfg file
by trail and error I know that the -54.20 and the 54.20 are the wing tips and they appear to be correct the problem is they are a little to high and I am not sure which number I should try to adjust
I know that these are from a reference point but I have no idea where that is. I also know that this is all part of the model file and that can not be changed without the original file and some other software to un-compile it and
re-compile it.
light.3 = 2, -96.50, -54.20, -0.60, fx_strobeh ,
light.4 = 2, -96.50, 54.20, -0.60, fx_strobeh ,
Thanks in advance
The reason for all of this was I did not like the panel that came with the aircraft as there was no way to enter an altitude . The strobe lights worked great but when I changed the panel they stopped working and that was the only change I had made
The crazy thing about this was the lines you see above I added as there was no entry for strobe lights so where were they being controlled from?
Someone suggested the model file But I did not alter that folder or file in any way.
Now there were some other folders inside the panel folder that I thought might have something to do with it so I moved them back into the panel folder but no luck so I added the lines you see and I do have strobe lights but they are not quite positioned correctly.
This is where I down loaded it from https://simviation.com/1/download-file? ... leId=55698