Good morning all...
Help needed with information on taking screenshots.
Feel free to comment on pictures also.
Some of the things I have learned....
I use two (2) Monitors....
One for the FSX Flight and Screenshots
Second Monitor is for Plan-G-V3.2.0 and many times will place the GPS on a corner of the screen I don't need as it is much larger than the picture in the simulated aircraft
What I would like to do is show that second monitor also while in simulated flight
Have placed Plan-G-V3.2.0 on the main monitor while in simulated flight and tried a screenshot
Have made the simulated flight picture smaller to place Plan-G-V3.2.0 beside it and took a screenshot
Neither worked....Plan-G-V3.2.0 would not show in screenshots taken
What am I doing wrong
I use Plan-G-V3.2.0 as I can fly a proper simulated circuit....with or without a Trail showing
Air Traffic Control works well with the program also so Touch and Goes are no problem using the same runway and same airport
Programming the Winds either in FSX "Weather Section" or in Plan-G-V3.2.0 always insures I get an ILS Runway to practice on without having to File a Flight Plan
Using the GPS....to turn OFF the Blinking Message while doing the Circuits I just Hold the Message Button for a second or two and it goes to OFF....really don't need it Blinking all the time while in the Circuit
Myself I like to start the simulated flight about Dusk and work it into Night....not sure why but have always liked night and instrument flying...
Now here are 3 shots:
Microsoft FSX Deluxe with Acceleration and Windows Home 10
Orbx Scenery
Weather: Wind and Wind Speed set in FSX in the Weather Section to give the ILS Runway of Choice
Aircraft: Payware.... Cessna Centurion
Location: Victoria...British Columbia...Canada.../Runways 27 & 9 can be used for ILS Practice
On Final Doing Touch and Go's on Runway 27...also Flying the ILS
Comments and Advice most welcome....