Page 1 of 1

IDE or SATA

PostPosted: Wed Jan 21, 2009 12:23 pm
by Timber
Hi all, I have been using and flying fs9 for many years now and totaly enjoy it. I also have been using the simviation site for lots of great info and downloads

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 1:58 pm
by Isak922
As far as I can tell, you wouldn't notice a difference between IDE and SATA drives as far as performance goes... Sure, SATA can support the faster RPM speeds of newer hard drives (10,000/15,000RPM), but that shouldn't effect game performance whatsoever.

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 2:02 pm
by Alejandro Rhodes
I heard coments around and my own humble experience SATA is faster HDD and cd/dvd rom ..

but the thin red cable..ahh it unplug and sometimes causes troubles,they should invent somekind of hook to hold the cable harder to the motherboard and devices

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 5:55 pm
by NickN
As far as I can tell, you wouldn't notice a difference between IDE and SATA drives as far as performance goes... Sure, SATA can support the faster RPM speeds of newer hard drives (10,000/15,000RPM), but that shouldn't effect game performance whatsoever.





http://forums1.avsim.net/index.php?s=&s ... &p=1530076

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 7:47 pm
by Isak922
As far as I can tell, you wouldn't notice a difference between IDE and SATA drives as far as performance goes... Sure, SATA can support the faster RPM speeds of newer hard drives (10,000/15,000RPM), but that shouldn't effect game performance whatsoever.





http://forums1.avsim.net/index.php?s=&s ... &p=1530076





Seems the master has proved me wrong. =P

I knew the speeds of the WD Raptor would certainly help with retrieving said data, but I didn't think it would actually help with in-game performance.

You learn someone new every day!

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 8:23 pm
by Timber
Thank you for the replys, and again great info. I know I am running old school CPU and such, but I guess you could say I am like Tim Allen in that old TV show Tim The Toolman Taylor and always looking to get that extra Power or performance out of someting without blowing it up 8-). All in all I do have fs9 running great but again that extra edge of peformance is always welcome.

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 8:39 pm
by NickN
The problem is Tim always blows it up

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 8:41 pm
by NickN
As far as I can tell, you wouldn't notice a difference between IDE and SATA drives as far as performance goes... Sure, SATA can support the faster RPM speeds of newer hard drives (10,000/15,000RPM), but that shouldn't effect game performance whatsoever.





http://forums1.avsim.net/index.php?s=&s ... &p=1530076





Seems the master has proved me wrong. =P

I knew the speeds of the WD Raptor would certainly help with retrieving said data, but I didn't think it would actually help with in-game performance.

You learn someone new every day!



Do not take that to mean you get more frame rates by changing storage

Performance in a computer is the combination of all parts working in concert to produce the performance result. When you select a SET of components which are geared toward the final result you get the result.

Plugging a 10k drive into a slow system will help with part of the problem but it will not act as a cure all for crap support components. That is where the myths about storage performance come from.. some dip-chit plugged a real hard drive into a chit system and expected miracles.. the problem is the dip-chit did not have the CPU and system to support the drive and then ran all over the internet claiming 10k drives are worthless

LOL!

Re: IDE or SATA

PostPosted: Wed Jan 21, 2009 10:09 pm
by T1MT1M
Ok quick question while on the topic. A SATA Dvd Drive will perform faster or slower than a IDE dvd drive? A simple faster or slower or no difference answer will suffice :).

Thanks. I burn quite a lot of information when i am backing up my pc's (am about to format and reinstall so a lot of burning ahead).

Re: IDE or SATA

PostPosted: Thu Jan 22, 2009 2:24 am
by Mazza
Ok quick question while on the topic. A SATA Dvd Drive will perform faster or slower than a IDE dvd drive? A simple faster or slower or no difference answer will suffice :).

Thanks. I burn quite a lot of information when i am backing up my pc's (am about to format and reinstall so a lot of burning ahead).


SATA can transfer data (correct?) faster than IDE, so just make sure it has a fast spin rate ;)

Re: IDE or SATA

PostPosted: Thu Jan 22, 2009 4:13 pm
by Wingo
As far as I understand it doesn't make that much of a difference. The choke point as far as data transfer is concerned is the burning itself and the speed of the drive. So you can have a 22x IDE or SATA drive and they will burn at the same speed. The only difference is that a SATA connection is more stable than an IDE for burning.

Re: IDE or SATA

PostPosted: Fri Jan 23, 2009 1:32 am
by jime59
I heard coments around and my own humble experience SATA is faster HDD and cd/dvd rom ..

but the thin red cable..ahh it unplug and sometimes causes troubles,they should invent somekind of hook to hold the cable harder to the motherboard and devices


They beat ya' to it Alrot. Great idea though. ;)

http://www.newegg.com/Product/Product.a ... 6812264003

Re: IDE or SATA

PostPosted: Fri Jan 23, 2009 3:14 am
by Keep It Simple
I heard coments around and my own humble experience SATA is faster HDD and cd/dvd rom ..

but the thin red cable..ahh it unplug and sometimes causes troubles,they should invent somekind of hook to hold the cable harder to the motherboard and devices


"Locking"  SATA cables have been on the market for quite some time now.  They are very secure and wont unplug until you want them to.