GTX 260 with Quad Doubles FPS

Hi All,
Finally went down the Quad and latest card route - despite what the forums may say about CPS limitation etc.
My framerates have doubled in areas of high 3D and low Ai - example London VFR with no ai traffic is doubled in terms of framerates and is a lot smoother with less blurries.
In other situations with high Ai and weather etc. my fps has increased by a n average of 50%.
This is over a core 2 duo of similar speed and an 8800GTS 320MB card.
Amazing improvement - really wasn't expecting it to be honest. So I've given this heads-up - a good card together with a quad core CPU - as long as they're o/c'd - really does improve things significantly.
I am playing at 1650x1080 rez, with nHancer at 4xSS Combined with 16x AF.
RAM is 1:1 (one to one) ratio and my CPU is volted at 1.47 in the BIOS (CPUz = 1.4 with droop) and the RAM is running at stock volts = 2.1v whilst I increased my MCH and FSB volts by just +0.1 to improve stability.
CPU is running at 425 x 8.
Temps never exceed 60 degress (CPU) while gaming and card is around 58 degrees. Idle temps - 50 deg CPU and 38 deg. G card.
Using Prime95...max temp is around 67 degrees. All this with a Arctic Cooler Pro with Arctic Silver tim.
Can't recommend this enough.
Eg. Framerates - London VFR Very Sparse Scenery with zero Ai or Weather with maximum water/texture/5m mesh etc. - over 50 fps in microlight (22 before).
Random rural airport at normal scenery with ai at zero and everything else maxed out - Cessna default - 150 fps / with G1000 version - 100 fps.....both 50% higher than before.
Nice ! - it'll do until the Nehalem/DDR3 system evolves and comes down in price - maybe a couple of years ? !
Other games have also almost, doubled in terms of framerates - pretty much across the board.
=============================================
FYI - 3D Mark 06 default 12x10 no AA/AF - 17,355 /16x10 4AA/16AF = 12500.
The only problem I have is that GriD crashes on occasion....but apparently that's quite common.
My message is that if people are having problems with the 260 (I hear this is the case) it ain't the card per se.
I am also using 177.92 driver and SP2 Acceleration with XP 32 - SP3 installed. I also used Ultimate Defrag to do a consolidated defrag with 250 GB of FSX data only on a the 500 GB Samsung 501 HD.
=============================================
Finally went down the Quad and latest card route - despite what the forums may say about CPS limitation etc.
My framerates have doubled in areas of high 3D and low Ai - example London VFR with no ai traffic is doubled in terms of framerates and is a lot smoother with less blurries.
In other situations with high Ai and weather etc. my fps has increased by a n average of 50%.
This is over a core 2 duo of similar speed and an 8800GTS 320MB card.
Amazing improvement - really wasn't expecting it to be honest. So I've given this heads-up - a good card together with a quad core CPU - as long as they're o/c'd - really does improve things significantly.
I am playing at 1650x1080 rez, with nHancer at 4xSS Combined with 16x AF.
RAM is 1:1 (one to one) ratio and my CPU is volted at 1.47 in the BIOS (CPUz = 1.4 with droop) and the RAM is running at stock volts = 2.1v whilst I increased my MCH and FSB volts by just +0.1 to improve stability.
CPU is running at 425 x 8.
Temps never exceed 60 degress (CPU) while gaming and card is around 58 degrees. Idle temps - 50 deg CPU and 38 deg. G card.
Using Prime95...max temp is around 67 degrees. All this with a Arctic Cooler Pro with Arctic Silver tim.
Can't recommend this enough.
Eg. Framerates - London VFR Very Sparse Scenery with zero Ai or Weather with maximum water/texture/5m mesh etc. - over 50 fps in microlight (22 before).
Random rural airport at normal scenery with ai at zero and everything else maxed out - Cessna default - 150 fps / with G1000 version - 100 fps.....both 50% higher than before.
Nice ! - it'll do until the Nehalem/DDR3 system evolves and comes down in price - maybe a couple of years ? !
Other games have also almost, doubled in terms of framerates - pretty much across the board.
=============================================
FYI - 3D Mark 06 default 12x10 no AA/AF - 17,355 /16x10 4AA/16AF = 12500.
The only problem I have is that GriD crashes on occasion....but apparently that's quite common.
My message is that if people are having problems with the 260 (I hear this is the case) it ain't the card per se.
I am also using 177.92 driver and SP2 Acceleration with XP 32 - SP3 installed. I also used Ultimate Defrag to do a consolidated defrag with 250 GB of FSX data only on a the 500 GB Samsung 501 HD.
=============================================