Page 1 of 1

motherboard limits (cpu wise etc)

PostPosted: Tue Jul 08, 2008 6:30 pm
by 2fst4u
i figured out that my motherboard has a 775 lga socket (pentium d cpu installed now) and that it has a pci-e slot for graphics. obviously that means i can have a quad core cpu and/or a top of the range graphics card right? i was just wondering if that was the case or if there are other specs that i need to look at that might limit my hardware choice. any ideas?

Re: motherboard limits (cpu wise etc)

PostPosted: Tue Jul 08, 2008 6:45 pm
by AMDDDA
The only other thing would be the PSU.


If you have a 500w+ PSU, you're completely safe, but under that then you'll need to check the graphic cards + CPU's Watt usage, along with the power the other PCI ports need.

Re: motherboard limits (cpu wise etc)

PostPosted: Tue Jul 08, 2008 6:45 pm
by JSpahn
Try and find the model number of the motherboard and look up the specifications, it may not accept the latest and greatest.

My old 775 only went to a p4 presscott......

Re: motherboard limits (cpu wise etc)

PostPosted: Thu Jul 10, 2008 3:34 am
by 2fst4u
its a dell owg864 motherboard. i cant find much about its compatibility. will it accept a core 2 duo?

Re: motherboard limits (cpu wise etc)

PostPosted: Thu Jul 10, 2008 6:38 am
by JSpahn
Oh a Dell there should be plenty of info on that PC, goto dell support website and enter the model number found on the back of the PC.....it should give you info on the motherboard and compatibility.....

Re: motherboard limits (cpu wise etc)

PostPosted: Thu Jul 10, 2008 9:34 pm
by 2fst4u
great, thanks

Re: motherboard limits (cpu wise etc)

PostPosted: Fri Jul 11, 2008 1:31 am
by eno
Not so fast ........ you said the bogey word ..... DELL. I would suggest reading http://www.simviation.com/cgi-bin/yabb2 ... 1214239941

I would hasten to add that Dell support will be absolutely useless unless you are buying the components from them at their over inflated prices.

PROCEED WITH EXTREME CAUTION.

Re: motherboard limits (cpu wise etc)

PostPosted: Fri Jul 11, 2008 9:35 pm
by 2fst4u
yea, i already came to the conclusion that the only way to go from here is a complete build. now i need to get saving!