Simviation Forums

My ballistix crapped out on me, so I grabbed some redlines. They're pretty awesome. 1116MHz at 5-5-5-12 right now.





And here's some newer pics of my computer.

DDR2?


Nice set up. Clean up a bit of the wires near the HDD just a little.

Yeah, DDR2. I won't get DDR3 til nehalem comes out probably.

Also, I didn't even notice those wires sticking out. Just shoved them back in there. Thanks

5-5-5 @ 1116 is not too bad... 1200 would be the hot spot... but what STRAP are you on and what FSB?

5-5-5 @ 1116 is not too bad... 1200 would be the hot spot... but what STRAP are you on and what FSB?

Strap is at 333MHz, FSB is at 465. I tried to get it to boot at 1163, but no go. I can't get it to boot over 1120. I didn't try upping the timings to 5-5-5-15 though, so maybe I can try that later.

Here's my CPUz validation:
http://valid.x86-secret.com/show_oc.php?id=370925

Good Job

almost forgot... what voltage are you running the sticks and what is the Muskin limit for warrantee?

is been so long since I have worked with their DDR2 I dont know where they are with that now a-days

Running the voltage on auto right now. Not sure what the max is for the warranty though.

OK, here is what I would like you to do...

First of all you should find out from Mush about the voltage for those exact sticks and what they will allow for warranty and here is why...

No luck. Did 450FSB at 2.3v and it wouldn't go. Oh well...

Hey, we tried.. some sticks can do it and some cant.

None the less... good clock!

Hey, we tried.. some sticks can do it and some cant.

None the less... good clock!

Yeah. They're fast enough for me