Page 1 of 1

Need advice on new hardware for new comp.

PostPosted: Sun May 18, 2008 10:10 pm
by McLovin
ok so I was looking at getting a new comp to build and needed yalls advise on these hardware......

CPU=E8500 Wolfdale
MB=EVGA 780i
Zaleman 9500 CPU cooling fan
RAM= 2x 2GB OCZ RAM (OCZ Reaper HPC) DDR2-1066
PSU= Corsair CMPSC-750TX 750 watts
ASUS black DVD/CD Burner Model E616A3T DVD 16x CD 48x
Case= NZXT Apollo Case
250GB Western Digital HD

comments more than welcome!!!!

Bret

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 2:17 am
by MWISimmer
Looks good so far.. which graphics card will you be using with it?

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 5:19 am
by Slotback
Looks good. :)

Unless you're going SLi I'd stick with an Intel board, but that's just me. :) 9500 should able to cool a 45nm dual easily, even heavily overclocked.

I don't know anything about that case, or PSU - but I know Corsair make some of the best power supplies.

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 10:38 am
by McLovin
check the link.

http://www.newegg.com/Product/Product.a ... VGA%2b790I

It is an Intel board. Im using an PNY 8800GT Extreme. I might get a dual Graphics set up later after I get my comm. cert.

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 10:46 am
by McLovin
Oh btw Ive changed it up a bit from when I posted this topic. this now what im getting....

CPU=E8500 Wolfdale 3.16GHz 6MB L2 Cache LGA 775 65W Dual-Core sooni will OC to 4.1
MB=EVGA 790i Ultra SLi
CPU fan= Zaleman CNPS9700 CPU cooling fan 110mm
RAM= 2x 2GB OCZ RAM (OCZ Reaper HPC) DDR3-10666 PC3 (voltage and timings will be set at 1.75v 6-6-6-18)
PSU= Corsair CMPSC-750TX 750 watts
DVD/CD burner= ASUS black DVD/CD Burner Model E616A3T DVD 16x CD 48x
Case= NZXT Apollo Case Orange
HD= 250GB Western Digital HD
graphics card= PNY 8800GT Extreme

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 10:55 am
by Wii
Oh btw Ive changed it up a bit from when I posted this topic. this now what im getting....

CPU=E8500 Wolfdale 3.16GHz 6MB L2 Cache LGA 775 65W Dual-Core sooni will OC to 4.1
MB=EVGA 790i Ultra SLi
CPU fan= Zaleman CNPS9700 CPU cooling fan 110mm
RAM= 2x 2GB OCZ RAM (OCZ Reaper HPC) DDR3-10666 PC3 (voltage and timings will be set at 1.75v 6-6-6-18)
PSU= Corsair CMPSC-750TX 750 watts
DVD/CD burner= ASUS black DVD/CD Burner Model E616A3T DVD 16x CD 48x
Case= NZXT Apollo Case Orange
HD= 250GB Western Digital HD
graphics card= PNY 8800GT Extreme

Your OS will be Vista Ultimate 64bit or XP Pro 64bit?

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 4:34 pm
by MWISimmer
It is an Intel board.

I think what Vodka Burner meant was an Intel chipset, X38 or X48. 790i is an Nvidia chipset.

Re: Need advice on new hardware for new comp.

PostPosted: Mon May 19, 2008 10:05 pm
by McLovin
It is an Intel board.

I think what Vodka Burner meant was an Intel chipset, X38 or X48. 790i is an Nvidia chipset.



ahh ok well I think I should be fine.

Oh btw Ive changed it up a bit from when I posted this topic. this now what im getting....

CPU=E8500 Wolfdale 3.16GHz 6MB L2 Cache LGA 775 65W Dual-Core sooni will OC to 4.1
MB=EVGA 790i Ultra SLi
CPU fan= Zaleman CNPS9700 CPU cooling fan 110mm
RAM= 2x 2GB OCZ RAM (OCZ Reaper HPC) DDR3-10666 PC3 (voltage and timings will be set at 1.75v 6-6-6-18)
PSU= Corsair CMPSC-750TX 750 watts
DVD/CD burner= ASUS black DVD/CD Burner Model E616A3T DVD 16x CD 48x
Case= NZXT Apollo Case Orange
HD= 250GB Western Digital HD
graphics card= PNY 8800GT Extreme

Your OS will be Vista Ultimate 64bit or XP Pro 64bit?


yes it will be Vista Ultimate