AGP Texture Acceleration = NOT AVAILABLE?!?!

[Silver1SWA]

Ok well first of all, I have an AGP ATI Radeon 9800 Pro 128MB video card with the Omega drivers installed (based on the Catalyst 3.6 drivers).

[Silver1SWA]

NEVERMIND!!  LOL it was actually the Omega drivers that helped me.  In the advanced SMARTGART options I had it set for PCI write and read with AGP write and read set to off.  I simply reversed it and BINGO problem solved!

[Silver1SWA]

AND HOLY CRAP!!!

[michaelb15]

uhhh, I think I am stuck in the same scenario  It turns out that I can shut off the PCI read and wright, and I can turn on the AGP read, but not the AGP Wright!!! What the hell?  Any suggestions, I am using the catelist 3.8 drivers since I have heard some bad stuff with lowering of frame rates on the 3.9

Hope somone can help

[bm]

Is your Card in PCI mode? You can check this on the active Desktop/Customize my desktop/settings/advanced.
If your settings say "Bus:     PCI mode" then you need to install your motherboard AGP drivers.
 This is what mine said and this was installed by 'proffesionals' at a computer shop. I wonder what they thought the point of an Fx 5600 if its not running AGP mode!
Heres how it should look (depending on what speed bus you have)

[michaelb15]

here is what I got here, this is what I mean