Simviation Forums

Does anyone have a issue with the toe brakes staying on? I have P3D V6 and here recently and not so recently the toe brakes have stayed in the on position. I have researched this on the internet and these P3D forums and tried all the fixes that I can find and nothing is working. I have tried 2 different brands of rudder pedals and they do the same thing.

So you are using rudder peddles?

What happens if you unplug them and just go back to the keyboard . for brakes? (if your setup allows that)
Do you have a joystick? What happens if you use the brake option on that?

Yes I have tried, if I do not have rudder pedals plugged in there is no issue, so I am going to re-install P3D and addons, and see if that works. I think that after awhile of adding to P3d some code might get in there and corrupt the sim. Thanks for the reply. Danny Feeney

OK , I have found out that this issue can be resolved in control calibration, you have to go thru the calibration steps 2 or 3 times and then it "UN-sticks" the brakes. But it does not always save those settings, so it seems that I have to keep going back into the calibration and re-calibrate the control, and make sure you select which control you are calibrating from the drop down arrow.