Page 1 of 3
Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 12:54 pm
by JBaymore
SeanTK has postponed the scheduled March 7th flight until tonight at 7:00 PM
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 1:00 pm
by JBaymore
I'll be flying the John Murchison freeware BAe 146-200 in the United Express paint, as usual.
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 1:03 pm
by Sean_TK
Thanks for the post.
John basically covered it. Please note that there is also a freeware KLGA available if you don't have the payware one. Just search the usual sites.
I'll be flying the Project Tupolev Tu-154M, in S7's "green livery".
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 1:16 pm
by ShaneG_old
[quote]I'll be flying the John Murchison freeware BAe 146-200 in the United Express paint, as usual.
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 1:22 pm
by JBaymore
If you want a little "ambiance" on this flight, you can run the following live audio feed in the background:
KBOS:
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 1:30 pm
by JBaymore
I've got the plane installed, where do I find the livery for that you're using?
Quite a nice flyer too.

Shane,
I'll have to check on that livery. I don't remember. Make sure that you have the 200 series... not the 300. The download is here in the simV library for the main Jon Murchison aircraft.
The HJG site here has the 100 and the 300 .....not the 200 (unfortunately).
If you install the Matthias Liebrecht panel and the flight dynamics for that plane (option)....... it'll take you a LONG while to get it airborne. That freeware panel is literally a payware quality "systems trainer". Use the basic panel for "fun" and for AI use.
I'll get back to you.
best,
...................john
PS: What will you be flying (so maybe was can all see each other in the correcft planes)?
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 2:05 pm
by skoker
Have you tried AES in multiplayer yet?
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 2:26 pm
by JBaymore
SeanTK,
I got the main plane here.... what re-paint are you using?
http://fs-proteam.com/products.html?op= ... tt=catalogbest,
.................john
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 2:27 pm
by JBaymore
[quote]Have you tried AES in multiplayer yet?
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 2:33 pm
by JBaymore
If you look here.......
http://www.baepanelproject.com/Baearcft.htmI am using the United Express / Air Wisconsin paint for the Jon Murchison model (JM) listed there.
best,
................john
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 2:56 pm
by Sean_TK
John,
The green one on this page, should be pretty obvious!
http://www.protu-154.com/forum/viewtopi ... 2&start=15
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 3:12 pm
by JBaymore
Which one on the page was that.... I couldn't find it?

best,
...................john
PS: I hope the install is straightforward. The Russian looks like heiroglyphics to me. ;)
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 3:18 pm
by JBaymore
Sean,
Is the autoinstaller for that base plane safe? I REALLY do not like autoinstall packages; they so often screw things up.
best,
....................john
Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 3:26 pm
by ShaneG_old
I've run the installers (directing to a temp folder) a few times for the base and the updates, and finally for the new full version and the sound and have never run into bad things.

I'll be using the 737 Experience:
http://www.simviation.com/fs2004jets84.htm1st link on the page.
Still trying to find a nice SouthWest livery for it, but if not, I'll fly in the Conti paint that comes with it.

Re: Monday, March 9, 2009 KLGA to KBOS

Posted:
Mon Mar 09, 2009 3:41 pm
by Sean_TK
John, I personally have not had issues with the Tu installer, however, I don't know what type of modules and extra software you need for your simpit and BAE systems stuff, so I would just do as Shane says and use a temp folder.