Simviation Forums

First, it's a great plane! Great job Jakes!
I didn't find too many things but here they are as of now:

When the wings are fully swept, there is a flat part of the leading edge that is visible right at the root.

2. The air intake needs some color.

This next one is with the panel. I get an incorrect Brakes Fail message on the annunciator panel.

The last one is that in flight with the gear down, when you use the rudder, the nose wheel moves as well. I don't know if this is intentional, but that seems unlikey for a jet.

Thats all! Thanks Jakes for the oppertunity to be a BETA tester and the for wonderful aircraft.

Thank you for the feedback! Will give attention to the intake. As for the panel errors..ive borrowed it from the learjet,but the actual panel and Vc is in the making,so it is irrelevant for now. About the nosewheel steering in the air... I dont know how to disable the steer function when in the air,because it have to steer on the ground. But will work on that. I am glad it loaded fine. Did your stais had a problem as well? Someone had a invisible stairs problem.

Jake

Re the steering..have you animated it as steering or as an extra rudder....I would guess the latter?

Garry

Jakes,
I had guessed that it was a temporary panel, but might as well be put in this thread. About the stairs; yes I do have a problem with invisible stairs. It makes for an interesting view from 40,000 feet.
C170B

Jake

Re the steering..have you animated it as steering or as an extra rudder....I would guess the latter?

Garry

You are correct. I did it as a rudder. Will do it as a steering,and see what happens. C170, I will work on the stairs,so you are not afraid at 40000 feet.hehe

Or at 4000 feet for that matter!