Yak-18 short manual
For anyone that doesn't know where the switches are located on the panel (manual doesn't have pictures)... a short guide
Apologies ahead for the weird sizing (very wide one for the switch block), but all shots whitin limits

Switches
Shift-numpad 2 from the main view
Radio is also on Shift-2 and shift-3 popup and doesnt react to the atc dialin thing

Left panel: standard view
You need at least 40% rpm for the generator to catch on

Right panel: shift-num5.
This is where the ADF lives

Main panel
ADF is in same gauge as the gyro compass (closed arrow). moves around when the station is out of range.
Big knob on left bottom of the gyrocompass moves the heading bug (open arrow)
Watch that engine temperature gauge: 280C = fail light and it stops
Eco Climb + max cruise: max throtle, 70%RPM
Eco Cruise: rpm down until it drops no more, then adjust throttle to get it at 60%
Apologies ahead for the weird sizing (very wide one for the switch block), but all shots whitin limits

Switches
Shift-numpad 2 from the main view
Radio is also on Shift-2 and shift-3 popup and doesnt react to the atc dialin thing

Left panel: standard view
You need at least 40% rpm for the generator to catch on

Right panel: shift-num5.
This is where the ADF lives

Main panel
ADF is in same gauge as the gyro compass (closed arrow). moves around when the station is out of range.
Big knob on left bottom of the gyrocompass moves the heading bug (open arrow)
Watch that engine temperature gauge: 280C = fail light and it stops
Eco Climb + max cruise: max throtle, 70%RPM
Eco Cruise: rpm down until it drops no more, then adjust throttle to get it at 60%

