Equatorial RTW flight in modified DC3

Flight Simulation Screenshots displaying your Flight Simulation Experience. MSFS, FSX, Prepar3D, XPlane and other Flight Simulators. Focus is your Flight Simulator Experience. Please upload to Simviation (Button at top right)

Equatorial RTW flight in modified DC3

Postby beaky » Fri Sep 09, 2005 9:00 pm

It seems I've caught "Round-the-world fever", and in my delirious state have decided to do it the hard way: along the equator. Well, not entirely along the equator, but in such a way that every leg will cross the equator, with each stop only a few degrees north or south.
 I'm starting from General Rivadeneira Airport in Manta, Ecuador. The first stop is to the west at Puerto Villamil in the Galapagos Islands, nearly 700 nm away.
The ship has been modified: seats removed, and extra fuel loaded in auxiliary tanks for a total of 1550 gallons. The fuel consumption figures for the trip as shown by FS9 don't seem right, so although this current mod. is probably not enough for the second looong leg from P.V. to Cassidy Airport in the Christmas Islands,  I know  it'll get me through the first leg, and give me a fair idea of the real consumption rate. Flying alone, I've brought about 200 lbs. of rations, survival gear, and small parts. Might need some heavy stuff for repairs later, but I've got  ground crews meeting me along the trip with spare engines, tires, etc., as well as lots of fuel and oil.
I'll only be using the 1930s nav. radios for the entire voyage- no GPS, no VOR radials, no peeking at the map. I suppose a lone pilot on such a trip could also navigate by stars and sun, but I don't know much about that.Doubt it would work very well in FS9 anyway...
 I've guesstimated my mag. compass corrections, and will tweak it every so often to compensate for variation. After this first leg, I'll probably go IFR, at least over the water routes, so I'll have a little help and occasional altimeter settings...






Takeoff from SETN goes well; soon I'm climbing out over the ocean.
Image

Soon there is nothing but low clouds, mist, and water. The IA at 2500 is disappointing, but winds are favorable; I should have plenty of fuel.

Image

"Well, this is exciting", I say to myself. Starting to wish I'd filed IFR: I've got nobody to talk to now.
Image


Finally, land appears: I am well ahead of the arrival time estimated by the FS Flight Planner. Assuming, of course, that this is the Galapagos Islands. but it must be... there's nothing else for thousands of miles. I try to raise Seymour, but for some reason I can't raise anybody. Maybe the tower's closed... I climb a bit to better orient myself, continuing more or less on my original heading.
Image


Realizing I'm north of my intended course, I skirt the tip of the first island, heading SW. A mass of clouds looms in the way...
Image



Eventually I spy Puerto Villamil ; in my haste to get down I wind up landing way long. Between that and the load of fuel still remaining, I barely stop the big twin before rolling down a hill. The good news: it only took 4 hours and a little over 500gals. of fuel to get here. the bad news: That won't cut it for the next leg: nearly 4,000 miles over the empty Pacific to the Christmas Islands.
Since Puerto Villamil has no fuel available, my ground crew has brought some over from  Seymour. I tell them to go get more- along with materials and tools to install more auxiliary tanks. Looks like we'll be staying here a little while...
Image



This is how poorly my ded. reckoning worked out; not disastrous but that error of a few degress could mean real trouble on the next leg.
Image


I can't find the credits for the "Bare Metal" texture; part of a package I got somewhere. This DC3 also uses M. Beaumont and D. Bitzer's DC3_BB3.zip, which is a cfg tweak for a more realistic
experience. The weight and fuel mods (which I'll change again for the next leg) are my own amateurish work... ;D
The water and cloud textures are add-ons also, but again, I can't remember where they came from. Need to rummage through my folders...

Next: The Big One- Galapagos Islands to Christmas Islands!!
Image
User avatar
beaky
Global Moderator
Global Moderator
 
Posts: 12877
Joined: Thu Dec 16, 2004 8:00 am
Location: Shenandoah, PA USA

Re: Equatorial RTW flight in modified DC3

Postby yancovitch » Sat Sep 10, 2005 1:50 am

enjoyed your trip .....
i7-7700k ....msi geforce gtx 1060....msi z270 gaming m5 lga 1151 motherboard....CORSAIR Vengeance LPX 16GB (2 x 8GB) ram.....
User avatar
yancovitch
Major
Major
 
Posts: 3530
Joined: Sat Aug 02, 2003 12:48 pm
Location: born montreal, lived vancouver, now live in burns lake bc.

Re: Equatorial RTW flight in modified DC3

Postby cspyro21 » Sat Sep 10, 2005 3:45 am

Nice forst start rottydaddy,
    looking forward to your next leg. And with a bit of practice, you'll soon be flying on you proposed route  ;)
User avatar
cspyro21
Major
Major
 
Posts: 4987
Joined: Sun Aug 28, 2005 6:11 am

Re: Equatorial RTW flight in modified DC3

Postby Hai Perso Coyone? » Sat Sep 10, 2005 4:05 am

Very nice Rotty!! Have a fun trip!!
User avatar
Hai Perso Coyone?
Ground hog
Ground hog
 
Posts: 0
Joined: Fri Jan 12, 2007 7:31 pm
Location: Rome, Italy

Re: Equatorial RTW flight in modified DC3

Postby TSC. » Sat Sep 10, 2005 6:52 am

Great shots Rotty & good luck on your trip.

TSC.
Image

'Only two things are infinite.......The Universe and Human stupidity........and I'm not too sure about the Universe' - Einstein
User avatar
TSC.
Major
Major
 
Posts: 4273
Joined: Wed Nov 03, 2004 11:11 am
Location: Torquay, Devon, England.

Re: Equatorial RTW flight in modified DC3

Postby krigl » Sat Sep 10, 2005 1:16 pm

Interestingly documented flight, you picked a nice plane for it too, and cool pics... looking forward to the next!
If you're bored of an evening - and you'll have to be - you can check out my screenshot gallery: Kriglsflightsimscreens...HERE

[center][img]http://www.simviation.com/phpup
krigl
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 8234
Joined: Fri Jun 10, 2005 3:47 am


Return to Simulation Screenshots Showcase

Who is online

Users browsing this forum: No registered users and 545 guests