Where am I??
Posted: Thu Mar 19, 2009 2:19 pmSo can you tell me where I am today?
Matt
Matt
Simviation Forums
Flight Simulator and other chat
https://forums.simviation.com/phpBB3/
Where am I??
https://forums.simviation.com/phpBB3/viewtopic.php?f=40&t=125610
Page 1 of 1
Posted: Thu Mar 19, 2009 2:19 pmRe: Where am I??
Posted: Thu Mar 19, 2009 2:19 pmInside a 737?
Re: Where am I??
Posted: Thu Mar 19, 2009 2:23 pmInside a 737?
No sh#t
Can you be a bit more specific?
Matt
Re: Where am I??
Posted: Thu Mar 19, 2009 2:28 pmGear well?
Re: Where am I??
Posted: Thu Mar 19, 2009 3:06 pmEither in the Main undercarridge bay or the Flight systems section
Re: Where am I??
Posted: Thu Mar 19, 2009 3:08 pmNo, a bit further afield.
Matt
Matt
Re: Where am I??
Posted: Thu Mar 19, 2009 3:41 pm...3rd Photo...
The Float Chamber covers on the Twin Carburettors on the 737 Engine?....
...?
Paul...
...!
....perhaps........... .... ....!
The Float Chamber covers on the Twin Carburettors on the 737 Engine?....
...?Paul...
...!....perhaps.......
.... .... ....!Re: Where am I??
Posted: Thu Mar 19, 2009 4:17 pmIt always worries me when aircraft engineers take photos inside their own aircraft then have to ask where they are. Bit like a Navigator saying "where are we?"
Re: Where am I??
Posted: Thu Mar 19, 2009 5:06 pmLast try from me....
Judging one of the parts looks like it says "pitot press" or something similar, I'm going to say the Hydrolics bay or cargo hold
Judging one of the parts looks like it says "pitot press" or something similar, I'm going to say the Hydrolics bay or cargo hold
Re: Where am I??
Posted: Thu Mar 19, 2009 8:32 pmMy guess at what these pictures are:
1) Aft pressure bulkhead.
2) Don't know.
3) Elevator feel system?
4) Unknown wiring bundle.
5) Possibly a bulkhead penetration of that same wiring bundle?
6) Don't know.
7) Jackscrew, presumably for the stab trim.
All considered, I'd say you're playing in the tail cone.
1) Aft pressure bulkhead.
2) Don't know.
3) Elevator feel system?
4) Unknown wiring bundle.
5) Possibly a bulkhead penetration of that same wiring bundle?
6) Don't know.
7) Jackscrew, presumably for the stab trim.
All considered, I'd say you're playing in the tail cone.
Re: Where am I??
Posted: Thu Mar 19, 2009 9:12 pmMy guess at what these pictures are:
1) Aft pressure bulkhead.
2) Don't know.
3) Elevator feel system?
4) Unknown wiring bundle.
5) Possibly a bulkhead penetration of that same wiring bundle?
6) Don't know.
7) Jackscrew, presumably for the stab trim.
All considered, I'd say you're playing in the tail cone.
Yes
Limit travel/config micro switches
Mach trim computer
Spare wire bundle
Yes
Stab attachment point
And yes.
It is the aft compartment of a Boeing 737-300. I will update the pictures tomorrow/later today (I am having coffee at 03:00 right now during night shift
)Matt
Re: Where am I??
Posted: Thu Mar 19, 2009 9:27 pmMach trim computer
I guess I had a 50/50 shot. It had to be some sort of airspeed-referenced system for the stab/elevator.