by javelin9r » Fri May 04, 2018 10:57 am
This is the aircraft cfg Lights section I adjusted.
//light.6= 9, -20.8, 0.0, 1.25, fx_EELightning_EngRun // Eng1 lit
light.7= 6, -17.8, 0.0, 1.25, fx_EELightning_AB // Eng1 reheat
//light.8= 9, -20.8, 0.0, 3.70, fx_EELightning_EngRun // Eng2 lit
light.9= 6, -17.8, 0.0, 3.90, fx_EELightning_AB // Eng2 reheat
light.10=6, -17.8, 0.0, 1.25, fx_EELightning_AB
light.11=6, -17.8, 0.0, 3.90, fx_EELightning_AB
light.12=6, -17.0, 0.0, 0.40, fx_phantflame
light.13=6, -17.0, 0.0, 3.50, fx_phantflame
I also got the burners to light at nearly full throttle by adjusting timings in the effects parameters.
I used the light numbers followed by =6, and placed the gauge37=DSBXML!DSBAburner, 0,0 in the panel cfg.
Then used gauge38=ALPHA_Swift!Alpha_exh_smoke2, 0,0,10,10 for the smoke effect to come when the throttle is opened.
The fx_EELightning_AB is taken from the original Virtavia cfg. fx_phantflame is from the freeware Virtavia Phantom FGR pack 3 effects.
Many thanks for your comments. If I can help with your burners, let me know.