Simviation Forums

from POSky



Too bad I couldn't get the shockwave lights to work on this plane 



8-)

ats a dirty one,nice shots mate 

cheers Dave

Did you try these?

Code: Select all

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo
light.1 = 1, 1.600, 0.000, -4.500, Opensky_beacon ,
light.2 = 1, 9.300, 0.400, 9.300, Opensky_beacon ,
light.3 = 4, 57.000, 0.000, 3.500, Opensky_Boeing_vclight ,
light.4 = 3, 30.000, 0.000, -3.000, Opensky_nacelle_refl , // front cargo
light.5 = 3, -33.000, 0.000, -2.000, Opensky_nacelle_refl , // rear cargo
light.6 = 3, 40.000, 0.000, 4.000, Opensky_nacelle_refl , // pax door
light.7 = 8, 14.000, -36.000, 5.000, Opensky_wing_light , // wing/LE slat rays from inspection lights
light.8 = 8, 14.000, 35.000, 5.000, Opensky_wing_light , // wing/LE slat rays from inspection lights
light.9= 6, 62.950, 0.000, -12.550, Opensky-taxi-refl , // gear bay taxi light rays from taxi lights
light.10= 3, -66.000, 0.000, 7.000, Opensky_nav_yellow , // Tail Nav Light
light.11= 2, -66.000, 0.000, 7.000, fx_strobeh , // Tail Strobe Light
light.12 = 5, 16.30, -7.90, -1.10, fx_shockwave_landing_light_narrow // Shockwave light
light.13 = 5, 16.30, 7.90, -1.10, fx_shockwave_landing_light_narrow // Shockwave light
light.14 = 6, 54.50, 0.00, -6.20, fx_Shockwave_landing_light_tail_old // Shockwave light
light.15 = 5, 16.30, -3.50, -4.30, fx_shockwave_landing_light_narrow_down // Shockwave light
light.16 = 5, 16.30, 3.50, -4.30, fx_shockwave_landing_light_narrow_down // Shockwave light

Good shots though

Did you try these?

Code: Select all

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo
light.1 = 1, 1.600, 0.000, -4.500, Opensky_beacon ,
light.2 = 1, 9.300, 0.400, 9.300, Opensky_beacon ,
light.3 = 4, 57.000, 0.000, 3.500, Opensky_Boeing_vclight ,
light.4 = 3, 30.000, 0.000, -3.000, Opensky_nacelle_refl , // front cargo
light.5 = 3, -33.000, 0.000, -2.000, Opensky_nacelle_refl , // rear cargo
light.6 = 3, 40.000, 0.000, 4.000, Opensky_nacelle_refl , // pax door
light.7 = 8, 14.000, -36.000, 5.000, Opensky_wing_light , // wing/LE slat rays from inspection lights
light.8 = 8, 14.000, 35.000, 5.000, Opensky_wing_light , // wing/LE slat rays from inspection lights
light.9= 6, 62.950, 0.000, -12.550, Opensky-taxi-refl , // gear bay taxi light rays from taxi lights
light.10= 3, -66.000, 0.000, 7.000, Opensky_nav_yellow , // Tail Nav Light
light.11= 2, -66.000, 0.000, 7.000, fx_strobeh , // Tail Strobe Light
light.12 = 5, 16.30, -7.90, -1.10, fx_shockwave_landing_light_narrow // Shockwave light
light.13 = 5, 16.30, 7.90, -1.10, fx_shockwave_landing_light_narrow // Shockwave light
light.14 = 6, 54.50, 0.00, -6.20, fx_Shockwave_landing_light_tail_old // Shockwave light
light.15 = 5, 16.30, -3.50, -4.30, fx_shockwave_landing_light_narrow_down // Shockwave light
light.16 = 5, 16.30, 3.50, -4.30, fx_shockwave_landing_light_narrow_down // Shockwave light

Good shots though

I did not. and think you for the .cfg

Without ground shadows, the plane doesn't really look like it's on the ground in the first on. The 2nd shot is good though.

8-)