More projects...

With a lot of interest in Auto's here, only wingless machines please!

More projects...

Postby Jared » Tue Oct 17, 2006 7:48 pm

Ok, these projects pertain to my old 65 mercury comet once again...

Firstly I THINK that I have either a bad master cylinder, power booster, or just loose, bad lines for my power brakes.

Reason I assume this is that when the vehicle is in park and I depress the brake pedal I tend to hear a hissing (air) noise coming from under the hood in the area around the power brake unit. Then when I'm going down the road I tend to have solid brakes when coming to a stop, but the longer I sit in one spot say a light or such I tend to feel the pedal start to push closer and closer to the floor.


My next question pertains to noisy valves on my old 289 engine. In normal idle (cold or hot doesn't matter) you don't hear anything but a smooth running engine. However as you start to rev it up to higher rpms, or as you're accelerating driving down the road you tend to hear the valves chattering away until you let off the gas and just cruise.  

I would almost assume that most of my valves are probably worn pretty well to begin with, and I'm not sure where to begin to correct this issue. would I be right to assume that this MIGHT be a timing issue?

Any thoughts, ideas, whatever are always appreciated..

thanks in advance,

Jared
User avatar
Jared
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 9976
Joined: Sun Jul 13, 2003 11:18 am
Location: Uniontown, Ohio

Re: More projects...

Postby Mushroom_Farmer » Tue Oct 17, 2006 10:08 pm

First question-Check the large vacuum line to the brake booster for any cracks or loose fit. If all is right then check the filter and grommet at the booster.
If there were bad/loose lines or wheel cylinders there would be a loss of fluid accompanied by damp spots at the point of leakage.

Second question-Find out if you have solid(mechanical) or hydraulic lifters(tappets for the Brits
Last edited by Mushroom_Farmer on Tue Oct 17, 2006 10:43 pm, edited 1 time in total.
Image

"We're just sitting here trying to put our PCjrs in a pile and burn them. And the damn things won't burn. That's the only thing IBM did right with it - they made i
User avatar
Mushroom_Farmer
Major
Major
 
Posts: 1633
Joined: Fri May 26, 2006 11:54 pm
Location: Indiana, USA


Return to Autos

Who is online

Users browsing this forum: No registered users and 534 guests