Page 1 of 1
ASI in Panel OFF
Posted:
Fri Nov 14, 2003 12:37 amby jiaweide
Hi,
While flying the Cessna 172 in Panel OFF Mode (ie only ASI, VVI, Compass, Turn & Slip, Alt visible) the ASI range (450kts) is too large for a Cessna (200kts). I like this veiw for landing but the speed tracking is not good due to this large range. Can this ASI be replaced?
Javed
Re: ASI in Panel OFF
Posted:
Fri Nov 14, 2003 4:52 pmby dave3cu
Hi Javed,
You can change that gauge by editing the panel.cfg file
in the.......'fs2002/aircraft/default/panel' folder.
Under the [MiniPanel00] section just replace the 'MiniPanel!Airspeed' gauge (gauge00) with another of your choice. The asi for the cessna is 'Cessna172!Airspeed'.
Leave the '0, 0, 100, 100' as this positions and sizes the gauge.
Cheers,
Dave
Re: ASI in Panel OFF
Posted:
Fri Nov 14, 2003 7:57 pmby jiaweide
Hi Dave,
Did what you suggested, but unfortunately did not work. The same asi comes up. What am I missing?
Javed
Re: ASI in Panel OFF
Posted:
Fri Nov 14, 2003 8:10 pmby jiaweide
Hi Dave,
It worked
I closed FS2002 and then re-launched it, and voila, it worked. Thanks. I wont be landing hot or stalling now!
Javed
Re: ASI in Panel OFF
Posted:
Sat Nov 15, 2003 3:02 amby dave3cu
Javed,
Glad to help, sorry I forgot to mention the restart, necessary as it is loaded at start.
Cheers,
dave