Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 8:50 pmDid you correctly put the aircraft entry into the 'aircraft.txt' file?
Simviation Forums
Flight Simulator and other chat
https://forums.simviation.com/phpBB3/
Re: Ttools 1.2-0.6 and AFCAD
https://forums.simviation.com/phpBB3/viewtopic.php?f=30&t=86715
Page 1 of 1
Posted: Sun Feb 23, 2003 8:50 pmRe: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 8:57 pmYes and it is #39 the txt and that is in my Ttool 1.2 folders...and it the time in Zulu time?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 9:00 pmyes and it is AC # 39 and that txt is in my Ttools 1.2 folder and is the times in zulu?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 9:01 pmyes and it is AC # 39 and that txt is in my Ttools 1.2 folder and is the times in zulu?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 9:03 pmsry about those post
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 9:03 pmsry about those post
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 9:09 pmYes, all times used by ttools are GMT
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 10:55 pmAdam, I have found that for some reason that is beyond my frail understanding TTools changes the times of flight plans that I manually input to new times that it has apparently decided are better.
My advice is to compile the plan and then de-compile and you will get a listing containing your flight. Look at the times and you will find that it may have changed.
In addition these times are, as Andrew states, GMT not Zulu. Be careful looking for flights in the uk during BST there is an hour differance. I am not sure where in the great time zone scheme of theings mass. is but you can put the time in as GMT and the program (fs2k2) will convert it to local for you in the time and season screen.
Will
My advice is to compile the plan and then de-compile and you will get a listing containing your flight. Look at the times and you will find that it may have changed.
In addition these times are, as Andrew states, GMT not Zulu. Be careful looking for flights in the uk during BST there is an hour differance. I am not sure where in the great time zone scheme of theings mass. is but you can put the time in as GMT and the program (fs2k2) will convert it to local for you in the time and season screen.
Will
Re: Ttools 1.2-0.6 and AFCAD
Posted: Sun Feb 23, 2003 11:01 pmAlso I have noticed that the traffic % is set to three. Is your AI traffic level set high enough to see the flight.
You may want to set the repeat at slightly higher than 1Hr as if the flight takes longer than an hour to complete you may well have problems.
Finally what sort of aircraft is your #39, it may not have sufficient time to reach the altitude you have specified.
Will
You may want to set the repeat at slightly higher than 1Hr as if the flight takes longer than an hour to complete you may well have problems.
Finally what sort of aircraft is your #39, it may not have sufficient time to reach the altitude you have specified.
Will
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 2:11 am[quote]In addition these times are, as Andrew states, GMT not Zulu.
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 3:35 amI thought that Zulu time was where you start from. Ie if you start at 08.00 in New York and land four hours later it is 12.00 Zulu but in concorde it may well be 10.30 local time and goodness knows what GMT. But I am probably wrong because I am notoriously thick with this stuff.
Will
Will
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 7:45 pmok here it is again
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 7:46 pmok here it is again
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 7:46 pmok here it is again
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
AC#39,N2317M,3%,1Hr,VFR,12:00:00,13:00:00,115,F,3241,KLWM,04:10:00,05:10:00,185,F,3241,KBOS
ok now first is this right?
now if i have the start at 12 and it ends at 13 that is 12 - 1 in local time?
what is that %? and what is the 115? and the # after the F?
haha.... thanks for your help...and could someone send me and example of there flight that the made?
Re: Ttools 1.2-0.6 and AFCAD
Posted: Mon Feb 24, 2003 7:48 pm#@$@ sry bout that again