Sound configuration problem... FS-2002

[KCD]

I have an excellent Cessna 120, done as freeware by Bill Lyons two or three years ago for FS-2000.  I want to use this airplane in FS-2002 but there is a problem.  The sound file, probably the best Continental 85 HP engine sounds ever, doesn't want to work.  On loading the plane (which loads perfectly), the engine goes into its start-up sequence, fires and goes to idle, but then it sputters and dies and goes through the sequence again and again and again.  It never gets to constant idle.  There must be some sort of problem in the "sound.cfg" file as it relates to FS-2002 vs. FS-2000.  I cannot figure it out.  Does any one have a fix for this?  Or does anyone have any ideas as to how to correct the problem?  I have included the sound.cfg below, but not the *.wav files.  Any ideas would be appreciated.

Thanks,

KCD

SOUND.CFG

[SOUND_ENGINE]
number_of_engines=1
eng1_shutdown=shutdown
eng1_combustion=ce0


[SHUTDOWN]
filename=shuti
viewpoint=1
link=shutdown.1

[SHUTDOWN.1]
filename=shuto
viewpoint=2


[ce0]
filename=swsti
type=0
viewpoint=1
rparams=1.0, 1.0, 350, 1.0
vparams=1.0, 280.0,  310.0, 0.0
min_volume=8300
link=ce1

[ce1]
filename=cont1i
type=0
viewpoint=1
rparams=1.4, 0.8, 1800.0,1.5
vparams=250.0, 0.0, 301.1,30.0,  350.0,42.0, 450.0,65.0, 1400.0, 0
min_volume=8300
link=ceidle

[ceidle]
filename=propw3i
viewpoint=1
type=0
rparams=300.0, 0.2, 1500.0, 1.6
vparams=300.0, 0.0, 301.0,70.0,  350.0, 75.0, 390.0,65.0, 2700.0, 0.0
min_volume=8300
link=ce2


[ce2]
filename=propi
type=0
viewpoint=1
rparams=200.0, 0.1, 1500.0, 1.3
vparams=300.0, 0.0, 400.0, 10, 1100.0, 10, 2300.0, 15
min_volume=8300
link=ce3

[ce3]
filename=conh2i
type=0
viewpoint=1
rparams=400.0, 0.1, 2500.0, 1.2
vparams=300.0, 0.0, 1300.0, 30.0, 1400.0, 40.0, 1800.0, 70.0
min_volume=8300
link=xstart


[xstart]
filename=swsto
type=0
viewpoint=2
rparams=5.0, 1.0, 350, 1.0
vparams=5.0, 99.5,310.0, 0.0
min_volume=8300
link=xce1



[xce1]
filename=cont1o
type=0
viewpoint=2
rparams=1.4, 0.7, 1800.0,1.5
vparams=250.0, 0.0, 301.1,60.0,  350.0,72.0, 450.0,95.0, 1400.0, 0
min_volume=8300
link=xceidle

[xceidle]
filename=propw3o
viewpoint=2
type=0
rparams=300.0, 0.3, 1500.0, 1.6
vparams=300.0, 0.0, 301.0,1.0,  350.0, 25.0, 390.0, 70.0,      1700.0, 0.0
min_volume=8300
link=xce2


[xce2]
filename=propo
type=0
viewpoint=2
rparams=200.0, 0.1, 1500.0, 1.3
vparams=400.0, 0.0, 900.0, 5, 1100.0, 10, 2300.0, 15
min_volume=8300
link=xce3

[xce3]
filename=conh2o
type=0
viewpoint=2
rparams=400.0, 0.1, 2500.0, 1.4
vparams=700.0, 0.0, 1300.0, 30.0, 1400.0, 40.0, 1800.0, 50.0
min_volume=8300

number_of_engines=1
eng1_shutdown=shutdown






[GEAR_DOWN]
filename=cmgeardn

[gear_up]
filename=cmgearup

[flapsh]
filename=cmflaph
initial_volume=9100

[flapsl]
filename=cmflaplp
initial_volume=9100

[flapst]
filename=cmflapt
initial_volume=9100

[stall_warning]
filename=stall

[left_touchdown]
filename=x
panning=-10000
initial_volume=10000
maximum_volume=10000

[right_touchdown]
filename=bump4
panning=10000
initial_volume=10000
maximum_volume=10000

[center_touchdown]
filename=bump4
panning=0
initial_volume=10000
maximum_volume=10000

[wind_sound]
filename=windy
minimum_volume=5000
maximum_volume=8000
minimum_rate=0.5
maximum_rate=1.0
minimum_speed=30
maximum_speed=230.0

[OVERSPEED_WARNING_SOUND]
filename=creak

[AP_DISENGAGE_SOUND]
filename=caapdis

[CRASH_SOUND]
filename=pcrash3
extra=cncrash1,cncrash2

[splash_SOUND]
filename=psplash
extra=cnsplas1,cnsplas2

[GROUND_ROLL]
filename=cnroll2
flags=125218
minimum_volume=6000
maximum_volume=10000
minimum_speed=3
maximum_speed=55
minimum_rate=0.80
maximum_rate=1.60
link=GROUND_ROLL2

[GROUND_ROLL2]
filename=cnroll
flags=6612
link=GROUND_ROLL3

[GROUND_ROLL3]
filename=cnroll3
flags=121300
link=GROUND_ROLL4

[GROUND_ROLL4]
filename=cnroll4
flags=512
link=GROUND_ROLL5

[GROUND_ROLL5]
filename=cnroll5
flags=1024
link=GROUND_ROLL6

[GROUND_ROLL6]
filename=cnroll6
flags=131072