Page 1 of 1

B1B Lancer

PostPosted: Mon Mar 03, 2003 8:59 pm
by Boris_G
Hi
Does anyone rember when did USA sent thair B1B Lancers to Iraq I kmow it hapened bout 5-4 month ago and do u know where did fly from (meaning city and airforce base) and where iit went (meaning city and airforce bse)

Re: B1B Lancer

PostPosted: Mon Mar 03, 2003 9:09 pm
by tvale80
i dont remeber the exact month but they were from ellsworth AFB in Rapid City SD, as for where they went i dont know

Re: B1B Lancer

PostPosted: Mon Mar 03, 2003 11:10 pm
by BMan1113VR
there were many bases that sent the B-1 over, i am pretty sure Mountain Home AFB did, amoung others

Re: B1B Lancer

PostPosted: Mon Mar 03, 2003 11:23 pm
by Blade
Most are based in the United Arab Emirates, and some at Deigo Garcia.

Re: B1B Lancer

PostPosted: Tue Mar 04, 2003 12:13 am
by Eric_Rose
Okay...I got the B1, but I am having problems. Although the visuals are stunning, I am having a hard time taking off. After I finally figured out how to hit the afterburners, I finally got enough spead to get off the ground...but then my horizontal stabilazers went berzerk. Now when I get to a certain speed, the plane flips and stuff.
I have downloaded all the files at the site including the update. Please help!

P.S. I added the B2 Spirit sounds and it works great.

Re: B1B Lancer

PostPosted: Tue Mar 04, 2003 12:35 am
by FSTipster
Well I finally got it. (I pinned the download speed problem to their ftp server btw - if you use the standard one it's fine).

I haven't got as far as taking off yet - the panel they supplied starts 2/3 of the way up my screen!!! (1024x768 res).

I'll fix it later but not too impressed so far. :(

Re: B1B Lancer

PostPosted: Tue Mar 04, 2003 4:51 am
by Mr. Bones
the Ellsworth bones are deployed at the moment but the Dyess ones are going to replace them soon

Re: B1B Lancer

PostPosted: Tue Mar 04, 2003 9:50 am
by trevyuk2001
Hi there fs2002tipster,

The problem you may be encountering on take off is due to the Force Feedback being enabled within fs2002. If you disable the effect, she will fly like she is supposed to.
We are looking into this issue and as soon as we have the answer, we shall upload a fix for that issue.
The panel is something that we hadn't bargained for. This, and a few other things, is being addressed with a fix this coming weekend.
I hope you are not too dissapointed for too long.

B-1B Panel Fix...

PostPosted: Tue Mar 04, 2003 2:13 pm
by Whitey
OK, here's how to fix the B-1B panel starting half way up your monitor...I figured this out myslef and posted it on th I3D website, BTW:

[Window Titles]
Window00=New Window
Window01=THROTTLE_PANEL
Window02=radios
Window03=GPS




[Window00]
file=B1leftfront10res.bmp
file_1024=B1leftfront10res.bmp
size_mm=1024,768
window_size_ratio=1.00  
position=7
visible=1
ident=0
window_size= 1.000, 1.000
window_pos= 0.000, 0.000

gauge00=B1b.adi,  407,535,145,172
gauge01=C-141HGHB_VSI_POINTER,  313,553,14,142
gauge02=C-141hghb_ias_tape,  353,555,24,139
gauge03=C-141hghb_alt_tape,  597,574,34,130
gauge04=C141_MACH4,  329,555,23,138
gauge05=p141_egt_K2,  928,501,39,206
gauge06=p141_FF_K2,  843,501,38,206
gauge07=p141_N1_K2,  885,501,38,206
gauge08=p141_N2_K2,  973,499,42,206
gauge09=_pd_asi8,  664,605,94,98
gauge10=_PD_radalt2,  568,443,90,102
gauge11=JSFPel.att,  661,486,94,113
gauge12=AV8B.altim,  757,605,85,98
gauge13=B1B.Comp2,  818,51,60,35
gauge14=CITATIONX.BALL,  547, 742 ,24,10
gauge15=f14.clo,  216,683,83,82
gauge16=fsd_warn.dh,  420,508,21,10
gauge17=fsd_warn.gear,  442,508,22,11
gauge18=fsd_warn.overspeed,  466,508,20,11
gauge19=fsd_warn.parkbrake,  488,508,22,11
gauge20=fsd_warn.stall,  511,508,22,11
gauge21=johan!Control_Surfaces,  663,720,92,50
gauge22=simicons!ATC Icon,  782,31,16,17
gauge23=simicons!Avionics Icon,  749,31,16,17
gauge24=simicons!ECU Icon,  799,31,16,17
gauge25=simicons!GPS Icon,  815,31,16,17
gauge26=simicons!Map Icon,  765,31,16,17
gauge27=B1B!B1_contrail,  20,20,20
gauge28=B1B!B1_ENG,  30,30,30
gauge29=B1B!AfterburnerStrobes,  30,30,30

[Window01]
Background_color=113,114,114
size_mm=598
window_size_ratio=1.00  
position=0
visible=0
ident=THROTTLE_PANEL
window_size= 0.300, 0.300
window_pos= 0.000, 0.000

gauge00=lear_45.thrust_levers.4,  153,3,302,454
gauge01=lear_45.spoiler,  -1,0,112,316
gauge02=lear_45.flaps,  485,0,112,316
gauge03=lear_45.gear,  427,477,172,124
gauge04=lear_45.light_switches,  260,459,168,138

[Window02]
Background_color=113,114,114
size_mm=359
window_size_ratio=1.00  
position=0
visible=0
ident=RADIO_STACK_PANEL
window_size= 0.300, 0.300
window_pos= 0.500, 0.500

gauge00=lear_45!Radio Stack,  -3,1,363,278
gauge01=f22.AUTOPILOT,  -10,282,371,78

[Window03]
Background_color=0,0,0
size_mm=512
window_size_ratio=1.00  
position=0
visible=0
ident=GPS_PANEL
window_size= 0.230, 0.370
window_pos= 0.690, 0.490

gauge00=gps!gps,  1,1,514,516


[Default View]
X=0
Y=0
SIZE_X=8191
SIZE_Y=5500


Just copy and paste this into your panel.cfg...remember to back up incase you don't trust me. :P

Re: B1B Lancer

PostPosted: Wed Mar 05, 2003 4:41 am
by Mr. Bones
thanx whitey, gonna try it also